Add "virtual" registers support to handle any irq configuration
registers in addition to the ones the framework currently supports
(status, mask, unmask, wake, type and ack). These are non-standard
registers that further configure irq type on some devices, so enable the
framework to add a variable number of them.
Signed-off-by: Guru Das Srinagesh <gurus@xxxxxxxxxxxxxx>
---
drivers/base/regmap/regmap-irq.c | 38 +++++++++++++++++++++++++++++++++++++-
include/linux/regmap.h | 5 +++++
2 files changed, 42 insertions(+), 1 deletion(-)
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index e1d8fc9e..d1ade76 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -38,6 +38,7 @@ struct regmap_irq_chip_data {
unsigned int *wake_buf;
unsigned int *type_buf;
unsigned int *type_buf_def;
+ unsigned int **virt_buf;
unsigned int irq_reg_stride;
unsigned int type_reg_stride;
@@ -94,7 +95,7 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
{
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
struct regmap *map = d->map;
- int i, ret;
+ int i, j, ret;
u32 reg;
u32 unmask_offset;
u32 val;
@@ -218,6 +219,20 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
}
}
+ if (d->chip->num_virt_regs) {
+ for (i = 0; i < d->chip->num_virt_regs; i++) {
+ for (j = 0; j < d->chip->num_regs; j++) {
+ reg = sub_irq_reg(d, d->chip->virt_reg_base[i],
+ j);
+ ret = regmap_write(map, reg, d->virt_buf[i][j]);
+ if (ret != 0)
+ dev_err(d->map->dev,
+ "Failed to write virt 0x%x: %d\n",
+ reg, ret);
+ }
+ }
+ }
+
if (d->chip->runtime_pm)
pm_runtime_put(map->dev);
@@ -691,6 +706,24 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
goto err_alloc;
}
+ if (chip->num_virt_regs) {
+ /*
+ * Create virt_buf[chip->num_extra_config_regs][chip->num_regs]
+ */
+ d->virt_buf = kcalloc(chip->num_virt_regs, sizeof(*d->virt_buf),
+ GFP_KERNEL);
+ if (!d->virt_buf)
+ goto err_alloc;
+
+ for (i = 0; i < chip->num_virt_regs; i++) {
+ d->virt_buf[i] = kcalloc(chip->num_regs,
+ sizeof(unsigned int),
+ GFP_KERNEL);
+ if (!d->virt_buf[i])
+ goto err_alloc;
+ }
+ }
+
d->irq_chip = regmap_irq_chip;
d->irq_chip.name = chip->name;
d->irq = irq;
@@ -863,6 +896,9 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
kfree(d->mask_buf);
kfree(d->status_buf);
kfree(d->status_reg_buf);
+ for (i = 0; i < chip->num_virt_regs; i++)
+ kfree(d->virt_buf[i]);
+ kfree(d->virt_buf);
kfree(d);
return ret;
}
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 18910bd..4c75717 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1383,6 +1383,8 @@ struct regmap_irq_sub_irq_map {
* peripheral to first peripheral.
* @num_main_regs: Number of 'main status' irq registers for chips which have
* main_status set.
+ * @num_virt_regs: Number of non-standard irq configuration registers.
+ * If zero unsupported.
*
* @status_base: Base status register address.
* @mask_base: Base mask register address.
@@ -1393,6 +1395,7 @@ struct regmap_irq_sub_irq_map {
* Using zero value is possible with @use_ack bit.
* @wake_base: Base address for wake enables. If zero unsupported.
* @type_base: Base address for irq type. If zero unsupported.
+ * @virt_reg_base: Base addresses for extra config regs.
* @irq_reg_stride: Stride to use for chips where registers are not contiguous.
* @init_ack_masked: Ack all masked interrupts once during initalization.
* @mask_invert: Inverted mask register: cleared bits are masked out.
@@ -1437,6 +1440,7 @@ struct regmap_irq_chip {
unsigned int num_main_status_bits;
struct regmap_irq_sub_irq_map *sub_reg_offsets;
int num_main_regs;
+ int num_virt_regs;
unsigned int status_base;
unsigned int mask_base;
@@ -1444,6 +1448,7 @@ struct regmap_irq_chip {
unsigned int ack_base;
unsigned int wake_base;
unsigned int type_base;
+ unsigned int *virt_reg_base;
unsigned int irq_reg_stride;
bool mask_writeonly:1;
bool init_ack_masked:1;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
