[PATCH 0/6] Add initial support for Qualcomm RB5 platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

This series adds initial support for Qualcomm Robotics RB5 Platform
based on QRB5165 SoC which is a derivative of SM8250 SoC customized
for robotics applications.

This board is one of the Consumer Edition boards of the 96Boards family
manufactured by Thundercomm. This initial support includes regulators,
UFS, debug UART, I2C, SPI, GPIO and LED peripherals.

More information about this board can be found in Qualcomm website:
https://www.qualcomm.com/products/qualcomm-robotics-rb5-platform

This series functionally depends on following patches for proper working:

irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers
arm64: dts: qcom: sm8250: add apps_smmu node

Thanks,
Mani

Manivannan Sadhasivam (6):
  dt-bindings: arm: qcom: Document SM8250 SoC and boards
  arm64: dts: qcom: sm8250: Rename UART2 node to UART12
  arm64: dts: qcom: Add basic devicetree support for QRB5165 RB5
  arm64: dts: qcom: qrb5165-rb5: Add onboard LED support
  arm64: dts: qcom: qrb5165-rb5: Add gpio-line-names for TLMM block
  arm64: dts: qcom: qrb5165-rb5: Add gpio-line-names for PM8150(B&L)

 .../devicetree/bindings/arm/qcom.yaml         |   7 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts      | 686 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts       |   4 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi          |  11 +-
 5 files changed, 706 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts

-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux