Add gpio-line-names property for QRB5165 RB5 board for naming all GPIOs
exposed by TLMM block.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 181 +++++++++++++++++++++++
1 file changed, 181 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 312316e23298..cf6dc0ec1640 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -431,6 +431,187 @@
&tlmm {
gpio-reserved-ranges = <40 4>;
+ gpio-line-names =
+ "GPIO-MM",
+ "GPIO-NN",
+ "GPIO-OO",
+ "GPIO-PP",
+ "GPIO-A",
+ "GPIO-C",
+ "GPIO-E",
+ "GPIO-D",
+ "I2C0-SDA",
+ "I2C0-SCL",
+ "GPIO-TT", /* GPIO_10 */
+ "NC",
+ "GPIO_12_I2C_SDA",
+ "GPIO_13_I2C_SCL",
+ "GPIO-X",
+ "GPIO_15_RGMII_INT",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX",
+ "HST_BT_UART_RX",
+ "HST_WLAN_EN", /* GPIO_20 */
+ "HST_BT_EN",
+ "GPIO-AAA",
+ "GPIO-BBB",
+ "GPIO-CCC",
+ "GPIO-Z",
+ "GPIO-DDD",
+ "GPIO-BB",
+ "GPIO_28_CAN_SPI_MISO",
+ "GPIO_29_CAN_SPI_MOSI",
+ "GPIO_30_CAN_SPI_CLK", /* GPIO_30 */
+ "GPIO_31_CAN_SPI_CS",
+ "GPIO-UU",
+ "NC",
+ "UART1_TXD_SOM",
+ "UART1_RXD_SOM",
+ "UART0_CTS",
+ "UART0_RTS",
+ "UART0_TXD",
+ "UART0_RXD",
+ "SPI1_MISO", /* GPIO_40 */
+ "SPI1_MOSI",
+ "SPI1_CLK",
+ "SPI1_CS",
+ "I2C1_SDA",
+ "I2C1_SCL",
+ "GPIO-F",
+ "GPIO-JJ",
+ "Board_ID1",
+ "Board_ID2",
+ "NC", /* GPIO_50 */
+ "NC",
+ "SPI0_MISO",
+ "SPI0_MOSI",
+ "SPI0_SCLK",
+ "SPI0_CS",
+ "GPIO-QQ",
+ "GPIO-RR",
+ "USB2LAN_RESET",
+ "USB2LAN_EXTWAKE",
+ "NC", /* GPIO_60 */
+ "NC",
+ "NC",
+ "LT9611_INT",
+ "GPIO-AA",
+ "USB_CC_DIR",
+ "GPIO-G",
+ "GPIO-LL",
+ "USB_DP_HPD_1P8",
+ "NC",
+ "NC", /* GPIO_70 */
+ "SD_CMD",
+ "SD_DAT3",
+ "SD_SCLK",
+ "SD_DAT2",
+ "SD_DAT1",
+ "SD_DAT0", /* BOOT_CFG3 */
+ "SD_UFS_CARD_DET_N",
+ "GPIO-II",
+ "PCIE0_RST_N",
+ "PCIE0_CLK_REQ_N", /* GPIO_80 */
+ "PCIE0_WAKE_N",
+ "GPIO-CC",
+ "GPIO-DD",
+ "GPIO-EE",
+ "GPIO-FF",
+ "GPIO-GG",
+ "GPIO-HH",
+ "GPIO-VV",
+ "GPIO-WW",
+ "NC", /* GPIO_90 */
+ "NC",
+ "GPIO-K",
+ "GPIO-I",
+ "CSI0_MCLK",
+ "CSI1_MCLK",
+ "CSI2_MCLK",
+ "CSI3_MCLK",
+ "GPIO-AA", /* CSI4_MCLK */
+ "GPIO-BB", /* CSI5_MCLK */
+ "GPIO-KK", /* GPIO_100 */
+ "CCI_I2C_SDA0",
+ "CCI_I2C_SCL0",
+ "CCI_I2C_SDA1",
+ "CCI_I2C_SCL1",
+ "CCI_I2C_SDA2",
+ "CCI_I2C_SCL2",
+ "CCI_I2C_SDA3",
+ "CCI_I2C_SCL3",
+ "GPIO-L",
+ "NC", /* GPIO_110 */
+ "NC",
+ "ACCEL_INT",
+ "GYRO_INT",
+ "GPIO-J",
+ "GPIO-YY",
+ "GPIO-H",
+ "GPIO-ZZ",
+ "NC",
+ "NC",
+ "NC", /* GPIO_120 */
+ "NC",
+ "MAG_INT",
+ "MAG_DRDY_INT",
+ "HST_SW_CTRL",
+ "GPIO-M",
+ "GPIO-N",
+ "GPIO-O",
+ "GPIO-P",
+ "PS_INT",
+ "WSA1_EN", /* GPIO_130 */
+ "USB_HUB_RESET",
+ "SDM_FORCE_USB_BOOT",
+ "I2S1_CLK_HDMI",
+ "I2S1_DATA0_HDMI",
+ "I2S1_WS_HDMI",
+ "GPIO-B",
+ "GPIO_137", /* To LT9611_I2S_MCLK_3V3 */
+ "PCM_CLK",
+ "PCM_DI",
+ "PCM_DO", /* GPIO_140 */
+ "PCM_FS",
+ "HST_SLIM_CLK",
+ "HST_SLIM_DATA",
+ "GPIO-U",
+ "GPIO-Y",
+ "GPIO-R",
+ "GPIO-Q",
+ "GPIO-S",
+ "GPIO-T",
+ "GPIO-V", /* GPIO_150 */
+ "GPIO-W",
+ "DMIC_CLK1",
+ "DMIC_DATA1",
+ "DMIC_CLK2",
+ "DMIC_DATA2",
+ "WSA_SWR_CLK",
+ "WSA_SWR_DATA",
+ "DMIC_CLK3",
+ "DMIC_DATA3",
+ "I2C4_SDA", /* GPIO_160 */
+ "I2C4_SCL",
+ "SPI3_CS1",
+ "SPI3_CS2",
+ "SPI2_MISO_LS3",
+ "SPI2_MOSI_LS3",
+ "SPI2_CLK_LS3",
+ "SPI2_ACCEL_CS_LS3",
+ "SPI2_CS1",
+ "NC",
+ "GPIO-SS", /* GPIO_170 */
+ "GPIO-XX",
+ "SPI3_MISO",
+ "SPI3_MOSI",
+ "SPI3_CLK",
+ "SPI3_CS",
+ "HST_BLE_SNS_UART_TX",
+ "HST_BLE_SNS_UART_RX",
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
};
&uart12 {
--
2.17.1
