Re: [PATCH V5 1/4] backlight: qcom-wled: convert the wled bindings to .yaml format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-04-15 20:39, Rob Herring wrote:
On Tue, Apr 07, 2020 at 09:17:07PM +0530, Kiran Gunda wrote:
Convert the qcom-wled bindings from .txt to .yaml format.
Also replace PM8941 to WLED3 and PMI8998 to WLED4.

Signed-off-by: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
Signed-off-by: Subbaraman Narayanamurthy <subbaram@xxxxxxxxxxxxxx>
Acked-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
---
.../bindings/leds/backlight/qcom-wled.txt | 154 ---------------- .../bindings/leds/backlight/qcom-wled.yaml | 201 +++++++++++++++++++++
 2 files changed, 201 insertions(+), 154 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt create mode 100644 Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml


diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
new file mode 100644
index 0000000..770e780
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Qualcomm Technologies, Inc. WLED driver
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
+  - Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
+
+description: |
+ WLED (White Light Emitting Diode) driver is used for controlling display + backlight that is part of PMIC on Qualcomm Technologies, Inc. reference + platforms. The PMIC is connected to the host processor via SPMI bus.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8941-wled
+      - qcom,pmi8998-wled
+      - qcom,pm660l-wled
+
+  reg:
+    maxItems: 1
+
+  default-brightness:
+    description:
+      brightness value on boot.
+    minimum: 0
+    maximum: 4095
+    default: 2048
+
+  label: true
+
+  qcom,cs-out:
+    description:
+      enable current sink output.
+      This property is supported only for WLED3.
+    type: boolean
+
+  qcom,cabc:
+    description:
+      enable content adaptive backlight control.
+    type: boolean
+
+  qcom,ext-gen:
+    description:
+      use externally generated modulator signal to dim.
+      This property is supported only for WLED3.
+    type: boolean
+
+  qcom,current-limit:
+    description:
+      mA; per-string current limit.
+      This property is supported only for WLED3.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    default: 20
+    minimum: 0
+    maximum: 25
+    multipleOf: 1

No point in defining a multiple of 1.

+
+  qcom,current-limit-microamp:
+    description:
+      uA; per-string current limit.
+    default: 25
+    minimum: 0
+    maximum: 30000
+    multipleOf: 25
+
+  qcom,current-boost-limit:
+    description:
+      mA; boost current limit.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,switching-freq:
+    description:
+      kHz; switching frequency.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200, 4800, 9600 ]
+
+  qcom,ovp:
+    description:
+      V; Over-voltage protection limit.
+      This property is supported only for WLED3.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 27, 29, 32, 35 ]
+      - default: 29
+
+  qcom,ovp-millivolt:
+    description:
+      Over-voltage protection limit. This property is for WLED4 only.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 18100, 19600, 29600, 31100 ]
+      - default: 29600
+
+  qcom,num-strings:
+    description:
+      number of led strings attached.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,enabled-strings:
+    description:
+      Array of the WLED strings numbered from 0 to 3. Each
+      string of leds are operated individually. Specify the
+      list of strings used by the device. Any combination of
+      led strings can be used.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+
+  qcom,external-pfet:
+    description:
+      Specify if external PFET control for short circuit
+      protection is used. This property is supported only
+      for WLED4.
+    type: boolean
+
+  qcom,auto-string-detection:
+    description:
+      Enables auto-detection of the WLED string configuration.
+      This feature is not supported for WLED3.
+    type: boolean
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pm8941-wled
+
+    then:
+      properties:
+        qcom,current-boost-limit:
+           enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ]
+           default: 805
+
+        qcom,switching-freq:
+           default: 1600
+
+        qcom,num-strings:
+           enum: [ 1, 2, 3 ]
+
+        interrupts:
+          items:
+            - description: over voltage protection interrupt.
+
+        interrupt-names:
+          items:
+            - const: ovp
+
+    else:
+      properties:
+        qcom,current-boost-limit:
+           enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ]
+           default: 970
+
+        qcom,switching-freq:
+           default: 800
+
+        qcom,num-strings:
+           enum: [ 1, 2, 3, 4 ]
+
+        interrupts:
+          items:
+            - description: over voltage protection interrupt.
+            - description: short circuit interrupt.
+
+        interrupt-names:
+          items:
+            - const: ovp
+            - const: short

Move these 2 props to the main section adding a 'minItems: 1'. Then just
define 'minItems: 2' here and 'maxItems: 1' in the 'then' clause.

+
+required:
+  - compatible
+  - reg
+  - label

Add:

additionalProperties: false

+
+examples:
+  - |
+    backlight@d800 {
+        compatible = "qcom,pm8941-wled";
+        reg = <0xd800 0x100>;
+        label = "backlight";
+
+        qcom,cs-out;
+        qcom,current-limit = <20>;
+        qcom,current-boost-limit = <805>;
+        qcom,switching-freq = <1600>;
+        qcom,ovp = <29>;
+        qcom,num-strings = <2>;
+        qcom,enabled-strings = <0 1>;
+     };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project

Thanks for reviewing. I will submit the next revision with all the fixes.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux