Re: [PATCH 3/3] arm64: dts: ipq8074: enable USB support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

On 4/11/2020 3:47 AM, Bjorn Andersson wrote:
On Fri 10 Apr 11:29 PDT 2020, Sivaprakash Murugesan wrote:

IPQ8074 has two super speed usb ports, add phy and dwc3 nodes
to enable them.

Thanks Sivaprakash, your patch looks good, just some comments on the
style below.

Co-developed-by: Balaji Prakash J <bjagadee@xxxxxxxxxxxxxx>
Signed-off-by: Balaji Prakash J <bjagadee@xxxxxxxxxxxxxx>
Signed-off-by: Sivaprakash Murugesan <sivaprak@xxxxxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/ipq8074-hk01.dts |  24 +++++
  arch/arm64/boot/dts/qcom/ipq8074.dtsi     | 168 ++++++++++++++++++++++++++++++
  2 files changed, 192 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 70be3f9..dd27d84 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -26,6 +26,22 @@
  	};
soc {
+		ssphy@58000 {
Please reference these by label, like we do in e.g. sdm845-mtp.dts.
ok.

+			status = "ok";
+		};
+
+		qusb@59000 {
+			status = "ok";
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		qusb@79000 {
+			status = "ok";
+		};
+
  		serial@78b3000 {
  			status = "ok";
  		};
@@ -65,6 +81,14 @@
  			};
  		};
+ usb3@8A00000 {
+			status = "ok";
+		};
+
+		usb3@8C00000 {
+			status = "ok";
+		};
+
  		phy@86000 {
  			status = "ok";
  		};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2b31823..47bb9ad 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -16,6 +16,92 @@
  		ranges = <0 0 0 0xffffffff>;
  		compatible = "simple-bus";
+ ssphy_1: ssphy@58000 {
Please use the generic name of "phy" here (i.e. ssphy_1: phy@58000 {)
ok.

+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00058000 0x1c4>;
+			status = "disabled";
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB1_AUX_CLK>,
+				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets =  <&gcc GCC_USB1_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy","common";
+
+			usb1_ssphy: lane@58200 {
+				reg = <0x00058200 0x130>,	/* Tx */
+				      <0x00058400 0x200>,	/* Rx */
+				      <0x00058800 0x1F8>,	/* PCS  */
+				      <0x00058600 0x044>;	/* PCS misc */
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB1_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb1_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_1: qusb@59000 {
phy@
ok.

+		    compatible = "qcom,msm8996-qusb2-phy";
Please add and use a ipq8074 compatible to the driver (.data can point
to msm8996_phy_cfg still).
sure, will do.

+		    reg = <0x00059000 0x180>;
+		    status = "disabled";
+		    #phy-cells = <0>;
+
+		    clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+			     <&xo>;
+		    clock-names = "cfg_ahb", "ref";
+
+		    resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+		};
+
+		ssphy_0: ssphy@78000 {
phy@
ok.
+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00078000 0x1c4>;
+			status = "disabled";
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets =  <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy","common";
+
+			usb0_ssphy: lane@78200 {
+				reg = <0x00078200 0x130>,	/* Tx */
+				      <0x00078400 0x200>,	/* Rx */
+				      <0x00078800 0x1F8>,	/* PCS  */
+				      <0x00078600 0x044>;	/* PCS misc */
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb0_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_0: qusb@79000 {
phy@
ok.

+		    compatible = "qcom,msm8996-qusb2-phy";
+		    reg = <0x00079000 0x180>;
+		    status = "disabled";
+		    #phy-cells = <0>;
+
+		    clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+			     <&xo>;
+		    clock-names = "cfg_ahb", "ref";
+
+		    resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+		};
+
  		tlmm: pinctrl@1000000 {
  			compatible = "qcom,ipq8074-pinctrl";
  			reg = <0x1000000 0x300000>;
@@ -272,6 +358,88 @@
  			status = "disabled";
  		};
+ usb3_0: usb3@8A00000 {
usb@ and please lower case and make sure the unit address matches the
reg.
ok.

+			compatible = "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				<&gcc GCC_USB0_MASTER_CLK>,
+				<&gcc GCC_USB0_SLEEP_CLK>,
+				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "sys_noc_axi",
+				"master",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+					  <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <133330000>,
+					       <19200000>;
+
+			resets = <&gcc GCC_USB0_BCR>;
+			status = "disabled";
+
+			dwc_0: dwc3@8A00000 {
Please lowercase the address
ok.

+				compatible = "snps,dwc3";
+				reg = <0x8A00000 0xcd00>;
Ditto.
ok.

+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		usb3_1: usb3@8C00000 {
usb@, lowercase and match reg.
ok

+			compatible = "qcom,dwc3";
+			reg = <0x08cf8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+				<&gcc GCC_USB1_MASTER_CLK>,
+				<&gcc GCC_USB1_SLEEP_CLK>,
+				<&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			clock-names = "sys_noc_axi",
+				"master",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+					  <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <133330000>,
+					       <19200000>;
+
+			resets = <&gcc GCC_USB1_BCR>;
+			status = "disabled";
+
+			dwc_1: dwc3@8C00000 {
Please lowercase
ok

+				compatible = "snps,dwc3";
+				reg = <0x8C00000 0xcd00>;
Ditto.
ok

+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
  		pcie_phy0: phy@86000 {
  			compatible = "qcom,ipq8074-qmp-pcie-phy";
  			reg = <0x86000 0x1000>;
If you could send a separate patch (after this is merged is okay) that
sort the nodes in this file by address, it would be much appreciated.
sure. Based on the comments above the dts needs clean. will send a separate patch for it.

Regards,
Bjorn

Thanks,

Siva

--
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux