[PATCH 3/3] arm64: dts: ipq8074: enable USB support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



IPQ8074 has two super speed usb ports, add phy and dwc3 nodes
to enable them.

Co-developed-by: Balaji Prakash J <bjagadee@xxxxxxxxxxxxxx>
Signed-off-by: Balaji Prakash J <bjagadee@xxxxxxxxxxxxxx>
Signed-off-by: Sivaprakash Murugesan <sivaprak@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts |  24 +++++
 arch/arm64/boot/dts/qcom/ipq8074.dtsi     | 168 ++++++++++++++++++++++++++++++
 2 files changed, 192 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 70be3f9..dd27d84 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -26,6 +26,22 @@
 	};
 
 	soc {
+		ssphy@58000 {
+			status = "ok";
+		};
+
+		qusb@59000 {
+			status = "ok";
+		};
+
+		ssphy@78000 {
+			status = "ok";
+		};
+
+		qusb@79000 {
+			status = "ok";
+		};
+
 		serial@78b3000 {
 			status = "ok";
 		};
@@ -65,6 +81,14 @@
 			};
 		};
 
+		usb3@8A00000 {
+			status = "ok";
+		};
+
+		usb3@8C00000 {
+			status = "ok";
+		};
+
 		phy@86000 {
 			status = "ok";
 		};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2b31823..47bb9ad 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -16,6 +16,92 @@
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		ssphy_1: ssphy@58000 {
+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00058000 0x1c4>;
+			status = "disabled";
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB1_AUX_CLK>,
+				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets =  <&gcc GCC_USB1_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy","common";
+
+			usb1_ssphy: lane@58200 {
+				reg = <0x00058200 0x130>,	/* Tx */
+				      <0x00058400 0x200>,	/* Rx */
+				      <0x00058800 0x1F8>,	/* PCS  */
+				      <0x00058600 0x044>;	/* PCS misc */
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB1_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb1_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_1: qusb@59000 {
+		    compatible = "qcom,msm8996-qusb2-phy";
+		    reg = <0x00059000 0x180>;
+		    status = "disabled";
+		    #phy-cells = <0>;
+
+		    clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+			     <&xo>;
+		    clock-names = "cfg_ahb", "ref";
+
+		    resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+		};
+
+		ssphy_0: ssphy@78000 {
+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00078000 0x1c4>;
+			status = "disabled";
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets =  <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy","common";
+
+			usb0_ssphy: lane@78200 {
+				reg = <0x00078200 0x130>,	/* Tx */
+				      <0x00078400 0x200>,	/* Rx */
+				      <0x00078800 0x1F8>,	/* PCS  */
+				      <0x00078600 0x044>;	/* PCS misc */
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb0_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_0: qusb@79000 {
+		    compatible = "qcom,msm8996-qusb2-phy";
+		    reg = <0x00079000 0x180>;
+		    status = "disabled";
+		    #phy-cells = <0>;
+
+		    clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+			     <&xo>;
+		    clock-names = "cfg_ahb", "ref";
+
+		    resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq8074-pinctrl";
 			reg = <0x1000000 0x300000>;
@@ -272,6 +358,88 @@
 			status = "disabled";
 		};
 
+		usb3_0: usb3@8A00000 {
+			compatible = "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				<&gcc GCC_USB0_MASTER_CLK>,
+				<&gcc GCC_USB0_SLEEP_CLK>,
+				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "sys_noc_axi",
+				"master",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+					  <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <133330000>,
+					       <19200000>;
+
+			resets = <&gcc GCC_USB0_BCR>;
+			status = "disabled";
+
+			dwc_0: dwc3@8A00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8A00000 0xcd00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		usb3_1: usb3@8C00000 {
+			compatible = "qcom,dwc3";
+			reg = <0x08cf8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+				<&gcc GCC_USB1_MASTER_CLK>,
+				<&gcc GCC_USB1_SLEEP_CLK>,
+				<&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			clock-names = "sys_noc_axi",
+				"master",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+					  <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <133330000>,
+					       <19200000>;
+
+			resets = <&gcc GCC_USB1_BCR>;
+			status = "disabled";
+
+			dwc_1: dwc3@8C00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8C00000 0xcd00>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
 		pcie_phy0: phy@86000 {
 			compatible = "qcom,ipq8074-qmp-pcie-phy";
 			reg = <0x86000 0x1000>;
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux