Re: [PATCH v4 1/2] clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri 10 Apr 17:52 PDT 2020, Wesley Cheng wrote:

> This adds the USB3 PIPE clock and GDSC structures, so
> that the USB driver can vote for these resources to be
> enabled/disabled when required.  Both are needed for SS
> and HS USB paths to operate properly.  The GDSC will
> allow the USB system to be brought out of reset, while
> the PIPE clock is needed for data transactions between
> the PHY and controller.
> 
> Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
> Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>


Stephen, let me know when you take this patch and I'll take the dts one.

Regards,
Bjorn

> ---
>  drivers/clk/qcom/gcc-sm8150.c               | 52 +++++++++++++++++++++++++++++
>  include/dt-bindings/clock/qcom,gcc-sm8150.h |  4 +++
>  2 files changed, 56 insertions(+)
> 
> diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
> index 2087721..ef98fdc 100644
> --- a/drivers/clk/qcom/gcc-sm8150.c
> +++ b/drivers/clk/qcom/gcc-sm8150.c
> @@ -21,6 +21,7 @@
>  #include "clk-rcg.h"
>  #include "clk-regmap.h"
>  #include "reset.h"
> +#include "gdsc.h"
>  
>  enum {
>  	P_BI_TCXO,
> @@ -3171,6 +3172,18 @@ enum {
>  	},
>  };
>  
> +static struct clk_branch gcc_usb3_prim_phy_pipe_clk = {
> +	.halt_check = BRANCH_HALT_SKIP,
> +	.clkr = {
> +		.enable_reg = 0xf058,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gcc_usb3_prim_phy_pipe_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
>  static struct clk_branch gcc_usb3_sec_clkref_clk = {
>  	.halt_reg = 0x8c028,
>  	.halt_check = BRANCH_HALT,
> @@ -3218,6 +3231,18 @@ enum {
>  	},
>  };
>  
> +static struct clk_branch gcc_usb3_sec_phy_pipe_clk = {
> +	.halt_check = BRANCH_HALT_SKIP,
> +	.clkr = {
> +		.enable_reg = 0x10058,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gcc_usb3_sec_phy_pipe_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
>  /*
>   * Clock ON depends on external parent 'config noc', so cant poll
>   * delay and also mark as crtitical for video boot
> @@ -3292,6 +3317,24 @@ enum {
>  	},
>  };
>  
> +static struct gdsc usb30_prim_gdsc = {
> +		.gdscr = 0xf004,
> +		.pd = {
> +			.name = "usb30_prim_gdsc",
> +		},
> +		.pwrsts = PWRSTS_OFF_ON,
> +		.flags = POLL_CFG_GDSCR,
> +};
> +
> +static struct gdsc usb30_sec_gdsc = {
> +		.gdscr = 0x10004,
> +		.pd = {
> +			.name = "usb30_sec_gdsc",
> +		},
> +		.pwrsts = PWRSTS_OFF_ON,
> +		.flags = POLL_CFG_GDSCR,
> +};
> +
>  static struct clk_regmap *gcc_sm8150_clocks[] = {
>  	[GCC_AGGRE_NOC_PCIE_TBU_CLK] = &gcc_aggre_noc_pcie_tbu_clk.clkr,
>  	[GCC_AGGRE_UFS_CARD_AXI_CLK] = &gcc_aggre_ufs_card_axi_clk.clkr,
> @@ -3480,10 +3523,12 @@ enum {
>  	[GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr,
>  	[GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr,
>  	[GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr,
> +	[GCC_USB3_PRIM_PHY_PIPE_CLK] = &gcc_usb3_prim_phy_pipe_clk.clkr,
>  	[GCC_USB3_SEC_CLKREF_CLK] = &gcc_usb3_sec_clkref_clk.clkr,
>  	[GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr,
>  	[GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr,
>  	[GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr,
> +	[GCC_USB3_SEC_PHY_PIPE_CLK] = &gcc_usb3_sec_phy_pipe_clk.clkr,
>  	[GCC_VIDEO_AHB_CLK] = &gcc_video_ahb_clk.clkr,
>  	[GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr,
>  	[GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr,
> @@ -3527,6 +3572,11 @@ enum {
>  	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
>  };
>  
> +static struct gdsc *gcc_sm8150_gdscs[] = {
> +	[USB30_PRIM_GDSC] = &usb30_prim_gdsc,
> +	[USB30_SEC_GDSC] = &usb30_sec_gdsc,
> +};
> +
>  static const struct regmap_config gcc_sm8150_regmap_config = {
>  	.reg_bits	= 32,
>  	.reg_stride	= 4,
> @@ -3541,6 +3591,8 @@ enum {
>  	.num_clks = ARRAY_SIZE(gcc_sm8150_clocks),
>  	.resets = gcc_sm8150_resets,
>  	.num_resets = ARRAY_SIZE(gcc_sm8150_resets),
> +	.gdscs = gcc_sm8150_gdscs,
> +	.num_gdscs = ARRAY_SIZE(gcc_sm8150_gdscs),
>  };
>  
>  static const struct of_device_id gcc_sm8150_match_table[] = {
> diff --git a/include/dt-bindings/clock/qcom,gcc-sm8150.h b/include/dt-bindings/clock/qcom,gcc-sm8150.h
> index 90d60ef..3e1a918 100644
> --- a/include/dt-bindings/clock/qcom,gcc-sm8150.h
> +++ b/include/dt-bindings/clock/qcom,gcc-sm8150.h
> @@ -240,4 +240,8 @@
>  #define GCC_USB30_SEC_BCR					27
>  #define GCC_USB_PHY_CFG_AHB2PHY_BCR				28
>  
> +/* GCC GDSCRs */
> +#define USB30_PRIM_GDSC                     4
> +#define USB30_SEC_GDSC						5
> +
>  #endif
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux