Re: [PATCH] arm64: dts: sdm845: Add iommus property to qup1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 04 Jun 15:46 PDT 2019, Stephen Boyd wrote:

> Quoting Bjorn Andersson (2019-06-04 15:37:00)
> > On Tue 04 Jun 15:29 PDT 2019, Stephen Boyd wrote:
> > 
> > > The SMMU that sits in front of the QUP needs to be programmed properly
> > > so that the i2c geni driver can allocate DMA descriptors. Failure to do
> > > this leads to faults when using devices such as an i2c touchscreen where
> > > the transaction is larger than 32 bytes and we use a DMA buffer.
> > > 
> > 
> > I'm pretty sure I've run into this problem, but before we marked the
> > smmu bypass_disable and as such didn't get the fault, thanks.
> > 
> > >  arm-smmu 15000000.iommu: Unexpected global fault, this could be serious
> > >  arm-smmu 15000000.iommu:         GFSR 0x00000002, GFSYNR0 0x00000002, GFSYNR1 0x000006c0, GFSYNR2 0x00000000
> > > 
> > > Add the right SID and mask so this works.
> > > 
> > > Cc: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> > > Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> > > ---
> > >  arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 +
> > >  1 file changed, 1 insertion(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > > index fcb93300ca62..2e57e861e17c 100644
> > > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > > @@ -900,6 +900,7 @@
> > >                       #address-cells = <2>;
> > >                       #size-cells = <2>;
> > >                       ranges;
> > > +                     iommus = <&apps_smmu 0x6c0 0x3>;
> > 
> > According to the docs this stream belongs to TZ, the HLOS stream should
> > be 0x6c3.
> 
> Aye, I saw this line in the downstream kernel but it doesn't work for
> me. If I specify <&apps_smmu 0x6c3 0x0> it still blows up. I wonder if
> my firmware perhaps is missing some initialization here to make the QUP
> operate in HLOS mode? Otherwise, I thought that the 0x3 at the end was
> the mask and so it should be split off to the second cell in the DT
> specifier but that seemed a little weird.
> 

Both 0x3 and 0x6c3 are documented as the actual HLOS stream id, with
mask of 0x0. 

Looping in Vivek as well.

Regards,
Bjorn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux