On Tue 04 Jun 15:48 PDT 2019, Doug Anderson wrote: > Hi, > > On Tue, Jun 4, 2019 at 3:37 PM Bjorn Andersson > <bjorn.andersson@xxxxxxxxxx> wrote: > > > > On Tue 04 Jun 15:29 PDT 2019, Stephen Boyd wrote: > > > > > The SMMU that sits in front of the QUP needs to be programmed properly > > > so that the i2c geni driver can allocate DMA descriptors. Failure to do > > > this leads to faults when using devices such as an i2c touchscreen where > > > the transaction is larger than 32 bytes and we use a DMA buffer. > > > > > > > I'm pretty sure I've run into this problem, but before we marked the > > smmu bypass_disable and as such didn't get the fault, thanks. > > > > > arm-smmu 15000000.iommu: Unexpected global fault, this could be serious > > > arm-smmu 15000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000002, GFSYNR1 0x000006c0, GFSYNR2 0x00000000 > > > > > > Add the right SID and mask so this works. > > > > > > Cc: Sibi Sankar <sibis@xxxxxxxxxxxxxx> > > > Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> > > > --- > > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 + > > > 1 file changed, 1 insertion(+) > > > > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > > index fcb93300ca62..2e57e861e17c 100644 > > > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > > @@ -900,6 +900,7 @@ > > > #address-cells = <2>; > > > #size-cells = <2>; > > > ranges; > > > + iommus = <&apps_smmu 0x6c0 0x3>; > > > > According to the docs this stream belongs to TZ, the HLOS stream should > > be 0x6c3. > > Since you've already got the docs in front of you, how about looking > up the value for qup0 so we can fix both of 'em? > Good thinking. QUP_1 is at stream 0x3. Regards, Bjorn
