On Tue 04 Jun 15:29 PDT 2019, Stephen Boyd wrote:
> The SMMU that sits in front of the QUP needs to be programmed properly
> so that the i2c geni driver can allocate DMA descriptors. Failure to do
> this leads to faults when using devices such as an i2c touchscreen where
> the transaction is larger than 32 bytes and we use a DMA buffer.
>
I'm pretty sure I've run into this problem, but before we marked the
smmu bypass_disable and as such didn't get the fault, thanks.
> arm-smmu 15000000.iommu: Unexpected global fault, this could be serious
> arm-smmu 15000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000002, GFSYNR1 0x000006c0, GFSYNR2 0x00000000
>
> Add the right SID and mask so this works.
>
> Cc: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index fcb93300ca62..2e57e861e17c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -900,6 +900,7 @@
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> + iommus = <&apps_smmu 0x6c0 0x3>;
According to the docs this stream belongs to TZ, the HLOS stream should
be 0x6c3.
Regards,
Bjorn
> status = "disabled";
>
> i2c8: i2c@a80000 {
> --
> Sent by a computer through tubes
>
