Move the device class fudge to a proper fixup function, and remove
qcom_pcie_rd_own_conf() which has become useless.
NB: dw_pcie_setup_rc() already did the right thing, but it's broken
on older qcom chips, such as 8064.
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
---
Changes from v4 to v5: Apply fixup to all qcom chips, the same way it was before
(thus the code remains functionally equivalent)
Drop Srinivas' Tested-by tag because of the change
---
drivers/pci/controller/dwc/pcie-qcom.c | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index a7f703556790..0ed235d560e3 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1129,25 +1129,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
return ret;
}
-static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
- u32 *val)
-{
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-
- /* the device class is not reported correctly from the register */
- if (where == PCI_CLASS_REVISION && size == 4) {
- *val = readl(pci->dbi_base + PCI_CLASS_REVISION);
- *val &= 0xff; /* keep revision id */
- *val |= PCI_CLASS_BRIDGE_PCI << 16;
- return PCIBIOS_SUCCESSFUL;
- }
-
- return dw_pcie_read(pci->dbi_base + where, size, val);
-}
-
static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
.host_init = qcom_pcie_host_init,
- .rd_own_conf = qcom_pcie_rd_own_conf,
};
/* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */
@@ -1309,6 +1292,12 @@ static const struct of_device_id qcom_pcie_match[] = {
{ }
};
+static void qcom_fixup_class(struct pci_dev *dev)
+{
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class);
+
static struct platform_driver qcom_pcie_driver = {
.probe = qcom_pcie_probe,
.driver = {
--
2.17.1
