Re: [PATCH v4] PCI: qcom: Use default config space read function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Stanimir,

Is v4 good enough for Bjorn to pick up?

Regards.

On 18/03/2019 18:14, Marc Gonzalez wrote:

> We don't need to fudge the device class in qcom_pcie_rd_own_conf()
> because dw_pcie_setup_rc() already does the right thing:
> 
> 	/* Program correct class for RC */
> 	dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
> 
> However, the above has no effect on 8064, thus a fixup is required.
> 
> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> Changes from v3 to v4: Define and use DEV_ID_8064 (not in include/linux/pci_ids.h because not shared)
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 25 ++++++++-----------------
>  1 file changed, 8 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index d185ea5fe996..712a83354f9d 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1129,25 +1129,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
>  	return ret;
>  }
>  
> -static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
> -				 u32 *val)
> -{
> -	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> -
> -	/* the device class is not reported correctly from the register */
> -	if (where == PCI_CLASS_REVISION && size == 4) {
> -		*val = readl(pci->dbi_base + PCI_CLASS_REVISION);
> -		*val &= 0xff;	/* keep revision id */
> -		*val |= PCI_CLASS_BRIDGE_PCI << 16;
> -		return PCIBIOS_SUCCESSFUL;
> -	}
> -
> -	return dw_pcie_read(pci->dbi_base + where, size, val);
> -}
> -
>  static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
>  	.host_init = qcom_pcie_host_init,
> -	.rd_own_conf = qcom_pcie_rd_own_conf,
>  };
>  
>  /* Qcom IP rev.: 2.1.0	Synopsys IP rev.: 4.01a */
> @@ -1309,6 +1292,14 @@ static const struct of_device_id qcom_pcie_match[] = {
>  	{ }
>  };
>  
> +#define DEV_ID_8064 0x0101
> +
> +static void qcom_fixup_class(struct pci_dev *dev)
> +{
> +	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
> +}
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, DEV_ID_8064, qcom_fixup_class);
> +
>  static struct platform_driver qcom_pcie_driver = {
>  	.probe = qcom_pcie_probe,
>  	.driver = {



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux