We don't need to fudge the device class in qcom_pcie_rd_own_conf()
because dw_pcie_setup_rc() already does the right thing:
/* Program correct class for RC */
dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
However, the above has no effect on 8064, thus a fixup is required.
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
---
Changes from v2 to v3: Add fixup for 8064 quirk
Changes from v1 to v2: Completely drop qcom_pcie_rd_own_conf
Stanimir, could you test this submission and send a Tested-by if it works?
---
drivers/pci/controller/dwc/pcie-qcom.c | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index d185ea5fe996..6fefff106b87 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1129,25 +1129,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
return ret;
}
-static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
- u32 *val)
-{
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-
- /* the device class is not reported correctly from the register */
- if (where == PCI_CLASS_REVISION && size == 4) {
- *val = readl(pci->dbi_base + PCI_CLASS_REVISION);
- *val &= 0xff; /* keep revision id */
- *val |= PCI_CLASS_BRIDGE_PCI << 16;
- return PCIBIOS_SUCCESSFUL;
- }
-
- return dw_pcie_read(pci->dbi_base + where, size, val);
-}
-
static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
.host_init = qcom_pcie_host_init,
- .rd_own_conf = qcom_pcie_rd_own_conf,
};
/* Qcom IP rev.: 2.1.0 Synopsys IP rev.: 4.01a */
@@ -1299,6 +1282,12 @@ static int qcom_pcie_probe(struct platform_device *pdev)
return ret;
}
+static void qcom_fixup_class(struct pci_dev *dev)
+{
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class); // 8064
+
static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
--
2.17.1
