On 04/02/2019 18:36, Marc Gonzalez wrote:
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index 6f4f4b79853b..831af20143da 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -711,6 +711,69 @@
> redistributor-stride = <0x0 0x20000>;
> interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> + ufshc: ufshc@1da4000 {
> + compatible = "qcom,msm8998-ufshc", "qcom,ufshc",
> + "jedec,ufs-2.0";
> + reg = <0x01da4000 0x2500>;
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&ufsphy_lanes>;
> + phy-names = "ufsphy";
> + lanes-per-direction = <2>;
> + power-domains = <&gcc UFS_GDSC>;
> +
> + clock-names =
> + "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
> + clocks =
> + <&gcc GCC_UFS_AXI_CLK>,
> + <&gcc GCC_AGGRE1_UFS_AXI_CLK>,
> + <&gcc GCC_UFS_AHB_CLK>,
> + <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
> + <&rpmcc RPM_SMD_LN_BB_CLK1>,
> + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
> + freq-table-hz =
> + <50000000 200000000>,
> + <0 0>,
> + <0 0>,
> + <37500000 150000000>,
> + <0 0>,
> + <0 0>,
> + <0 0>,
> + <0 0>;
> +
> + resets = <&gcc GCC_UFS_BCR>;
> + reset-names = "rst";
> + };
In https://patchwork.kernel.org/patch/10657699/
Bjorn mentioned that the resets prop are useless upstream.
Can, Vivek, Dov:
What is the status on the "scsi: ufs: Add core reset support" patch?
https://patchwork.kernel.org/patch/10652705/
Regards.
