Add support for the ti,bq24192 variant and a child node for the
usb-otg-vbus regulator.
Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/power/supply/bq24190.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt
index 9e517d307070..8f2560824a97 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
@@ -3,6 +3,7 @@ TI BQ24190 Li-Ion Battery Charger
Required properties:
- compatible: contains one of the following:
* "ti,bq24190"
+ * "ti,bq24192"
* "ti,bq24192i"
- reg: integer, I2C address of the charger.
- interrupts[-extended]: configuration for charger INT pin.
@@ -19,6 +20,12 @@ Optional properties:
- ti,system-minimum-microvolt: when power is connected and the battery is below
minimum system voltage, the system will be regulated above this setting.
+child nodes:
+- usb-otg-vbus:
+ Usage: optional
+ Description: Regulator that is used to control the VBUS voltage direction for
+ either USB host mode or for charging on the OTG port.
+
Notes:
- Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default
charge current on USB SDP ports, among other features). To simulate this on
--
2.17.1
