On Mon, Oct 01, 2018 at 01:30:01AM -0400, Brian Masney wrote: > Add support for the ti,bq24192 variant and a child node for the > usb-otg-vbus regulator. > > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/power/supply/bq24190.txt | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt > index 9e517d307070..8f2560824a97 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt > +++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt > @@ -3,6 +3,7 @@ TI BQ24190 Li-Ion Battery Charger > Required properties: > - compatible: contains one of the following: > * "ti,bq24190" > + * "ti,bq24192" > * "ti,bq24192i" > - reg: integer, I2C address of the charger. > - interrupts[-extended]: configuration for charger INT pin. > @@ -19,6 +20,12 @@ Optional properties: > - ti,system-minimum-microvolt: when power is connected and the battery is below > minimum system voltage, the system will be regulated above this setting. > > +child nodes: > +- usb-otg-vbus: > + Usage: optional > + Description: Regulator that is used to control the VBUS voltage direction for > + either USB host mode or for charging on the OTG port. What about the regulator properties? > + > Notes: > - Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default > charge current on USB SDP ports, among other features). To simulate this on > -- > 2.17.1 >
