Hi,
On Mon, Oct 01, 2018 at 01:30:02AM -0400, Brian Masney wrote:
> From: Jonathan Marek <jonathan@xxxxxxxx>
>
> This patch adds support for the bq24192 variant to bq24190_charger.
>
> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
> ---
> drivers/power/supply/bq24190_charger.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
> index b58df04d03b3..e3836145286d 100644
> --- a/drivers/power/supply/bq24190_charger.c
> +++ b/drivers/power/supply/bq24190_charger.c
> @@ -1638,7 +1638,8 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi)
> return ret;
>
> if (v != BQ24190_REG_VPRS_PN_24190 &&
> - v != BQ24190_REG_VPRS_PN_24192I) {
> + v != BQ24190_REG_VPRS_PN_24192 &&
> + v != BQ24190_REG_VPRS_PN_24192I) {
> dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v);
> return -ENODEV;
> }
This becomes too ugly. Do it like this instead:
switch(v) {
case BQ24190_REG_VPRS_PN_24190:
case BQ24190_REG_VPRS_PN_24192:
case BQ24190_REG_VPRS_PN_24192I:
break;
default:
dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v);
return -ENODEV;
}
-- Sebastian
> @@ -1931,6 +1932,7 @@ static const struct dev_pm_ops bq24190_pm_ops = {
>
> static const struct i2c_device_id bq24190_i2c_ids[] = {
> { "bq24190" },
> + { "bq24192" },
> { "bq24192i" },
> { },
> };
> @@ -1939,6 +1941,7 @@ MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
> #ifdef CONFIG_OF
> static const struct of_device_id bq24190_of_match[] = {
> { .compatible = "ti,bq24190", },
> + { .compatible = "ti,bq24192", },
> { .compatible = "ti,bq24192i", },
> { },
> };
> --
> 2.17.1
>
Attachment:
signature.asc
Description: PGP signature
