The load a particular sdhc controller should request from a regulator
is device specific and hence each device should individually vote for
the required load.
Signed-off-by: Vijay Viswanath <vviswana@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index 502b3b8..ee34f28 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -26,6 +26,11 @@ Required properties:
"cal" - reference clock for RCLK delay calibration (optional)
"sleep" - sleep clock for RCLK delay calibration (optional)
+Optional properties:
+- <supply>-current-level - specifies load levels for supply during BUS_ON
+ and BUS_OFF states in power irq. Should be specified in
+ pairs (lpm, hpm), for BUS_OFF and BUS_ON respectively.
+ Units uA.
Example:
sdhc_1: sdhci@f9824900 {
@@ -37,6 +42,7 @@ Example:
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
+ vqmmc-current-level = <200 22000>;
pinctrl-names = "default";
pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
