[PATCH V1 1/3] mmc: sdhci: Allow platform controlled voltage switching

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some controllers can have internal mechanism to inform the SW that it
is ready for voltage switching. For such controllers, changing voltage
before the HW is ready can result in various issues.

During setup/cleanup of host, check whether regulator enable/disable
was already done by platform driver.

Signed-off-by: Vijay Viswanath <vviswana@xxxxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 1c828e0..494a1e2 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3472,6 +3472,7 @@ int sdhci_setup_host(struct sdhci_host *host)
 	unsigned int override_timeout_clk;
 	u32 max_clk;
 	int ret;
+	bool enable_vqmmc = false;
 
 	WARN_ON(host == NULL);
 	if (host == NULL)
@@ -3485,7 +3486,12 @@ int sdhci_setup_host(struct sdhci_host *host)
 	 * the host can take the appropriate action if regulators are not
 	 * available.
 	 */
-	ret = mmc_regulator_get_supply(mmc);
+	if (!mmc->supply.vmmc) {
+		ret = mmc_regulator_get_supply(mmc);
+		enable_vqmmc  = true;
+	} else {
+		ret = 0;
+	}
 	if (ret)
 		return ret;
 
@@ -3736,7 +3742,10 @@ int sdhci_setup_host(struct sdhci_host *host)
 
 	/* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
 	if (!IS_ERR(mmc->supply.vqmmc)) {
-		ret = regulator_enable(mmc->supply.vqmmc);
+		if (enable_vqmmc)
+			ret = regulator_enable(mmc->supply.vqmmc);
+		else
+			ret = 0;
 		if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000,
 						    1950000))
 			host->caps1 &= ~(SDHCI_SUPPORT_SDR104 |
@@ -3984,7 +3993,7 @@ int sdhci_setup_host(struct sdhci_host *host)
 	return 0;
 
 unreg:
-	if (!IS_ERR(mmc->supply.vqmmc))
+	if (!IS_ERR(mmc->supply.vqmmc) && enable_vqmmc)
 		regulator_disable(mmc->supply.vqmmc);
 undma:
 	if (host->align_buffer)
@@ -4002,7 +4011,8 @@ void sdhci_cleanup_host(struct sdhci_host *host)
 {
 	struct mmc_host *mmc = host->mmc;
 
-	if (!IS_ERR(mmc->supply.vqmmc))
+	if (!IS_ERR(mmc->supply.vqmmc) &&
+			(regulator_is_enabled(mmc->supply.vqmmc) > 0))
 		regulator_disable(mmc->supply.vqmmc);
 
 	if (host->align_buffer)
@@ -4135,7 +4145,8 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
 
 	tasklet_kill(&host->finish_tasklet);
 
-	if (!IS_ERR(mmc->supply.vqmmc))
+	if (!IS_ERR(mmc->supply.vqmmc) &&
+			(regulator_is_enabled(mmc->supply.vqmmc) > 0))
 		regulator_disable(mmc->supply.vqmmc);
 
 	if (host->align_buffer)
-- 
 Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux