Hi Srini,
On 16 March 2018 at 22:54, <srinivas.kandagatla@xxxxxxxxxx> wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
>
> This patch add support to DB600c board, which is another
> 96boards based on Qualcomm APQ8064 SoC.
>
> Support for USB, HDMI, PCIe, I2C, SPI, eMMC, microSD card, LEDs
> device tree nodes is added in this patch.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> Changes since v1:
> - added chosen node with stdout, suggested by Stephen Boyd
> - removed spi flash node and gpio22 pinconf, as its not required in this patch.
> - removed extra comment lines and fix a node name, spotted by Stephen Boyd.
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/qcom-apq8064-db600c.dts | 530 ++++++++++++++++++++++++++++++
> 2 files changed, 531 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-apq8064-db600c.dts
> +
> + gsbi@16500000 {
> + status = "okay";
> + qcom,mode = <GSBI_PROT_UART_W_FC>;
> + serial@1654000 {
Missing zero, should be serial@16540000.
> + label = "BT-UART";
> + status = "okay";
> + pinctrl-name = "default";
> + pinctrl-0 = <&gsbi6_uart_4pins>;
> + };
> + };
Regards,
Loic
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
