On Fri, Mar 16, 2018 at 09:54:36PM +0000, srinivas.kandagatla@xxxxxxxxxx wrote: > From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > > This patch add support to DB600c board, which is another > 96boards based on Qualcomm APQ8064 SoC. > > Support for USB, HDMI, PCIe, I2C, SPI, eMMC, microSD card, LEDs > device tree nodes is added in this patch. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > --- > Changes since v1: > - added chosen node with stdout, suggested by Stephen Boyd > - removed spi flash node and gpio22 pinconf, as its not required in this patch. > - removed extra comment lines and fix a node name, spotted by Stephen Boyd. > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/qcom-apq8064-db600c.dts | 530 ++++++++++++++++++++++++++++++ > 2 files changed, 531 insertions(+) > create mode 100644 arch/arm/boot/dts/qcom-apq8064-db600c.dts Hello Srini (I hope you had a nice vacation!) Running checkpatch on this patch gives a few of these warnings: WARNING: line over 80 characters These can probably be ignored, since they exist for most arch/arm/boot/dts/qcom-*.dts files. However, it also gives a few of these errors: ERROR: trailing whitespace These should probably be fixed, since the are errors and not warnings. Kind regards, Niklas -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html