Hello, This patch series adds a driver and device tree binding documentation for PMIC regulator control via Resource Power Manager-hardened (RPMh) on some Qualcomm Technologies, Inc. SoCs such as SDM845. RPMh is a hardware block which contains several accelerators which are used to manage various hardware resources that are shared between the processors of the SoC. The final hardware state of a regulator is determined within RPMh by performing max aggregation of the requests made by all of the processors. The RPMh regulator driver depends upon the RPMh driver [1] and command DB driver [2] which are both still undergoing review. Thanks, David [1]: https://lkml.org/lkml/2018/3/9/979 [2]: https://lkml.org/lkml/2018/3/14/787 David Collins (2): regulator: add QCOM RPMh regulator driver dt-bindings: regulator: add QCOM RPMh regulator bindings .../bindings/regulator/qcom,rpmh-regulator.txt | 246 +++++ drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/qcom_rpmh-regulator.c | 1124 ++++++++++++++++++++ .../dt-bindings/regulator/qcom,rpmh-regulator.h | 40 + 5 files changed, 1420 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt create mode 100644 drivers/regulator/qcom_rpmh-regulator.c create mode 100644 include/dt-bindings/regulator/qcom,rpmh-regulator.h -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
