Re: [PATCH v4 3/4] dt-bindings: phy: Add support for QMP phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 03/07/2017 07:30 PM, Stephen Boyd wrote:
(Not sure I replied so here it is)

On 01/27, Vivek Gautam wrote:

On 01/27/2017 05:13 AM, Stephen Boyd wrote:
On 01/24, Vivek Gautam wrote:
 From "./Documentation/devicetree/bindings/graph.txt" -
"The device tree graph bindings described herein abstract more complex
devices that can have multiple specifiable ports, each of which can be
linked to one or more ports of other devices."

So, this means we use 'port', 'ports' and 'endpoint' for devices whose one
or more ports is connected to other device's one or more ports.

I can use 'lane' for the node name here.
Ok.

                                 reg = <0x035000 0x130>,
                                         <0x035200 0x200>,
                                         <0x035400 0x1dc>;
                                 #phy-cells = <0>;

                                 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
                                 clock-names = "pipe0";
                                 resets = <&gcc GCC_PCIE_0_PHY_BCR>;
                                 reset-names = "lane0";
                         };

                       pciephy_p1: port@1 {
                                 reg = <0x036000 0x130>,
                                         <0x036200 0x200>,
                                         <0x036400 0x1dc>;
                                 #phy-cells = <0>;

                                 clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
                                 clock-names = "pipe1";
                                 resets = <&gcc GCC_PCIE_1_PHY_BCR>;
                                 reset-names = "lane1";
                         };

                         pciephy_p2: port@2 {
                                 reg = <0x037000 0x130>,
                                         <0x037200 0x200>,
                                         <0x037400 0x1dc>;
                                 #phy-cells = <0>;

                                 clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
                                 clock-names = "pipe2";
                                 resets = <&gcc GCC_PCIE_2_PHY_BCR>;
                                 reset-names = "lane2";
                         };
                 };
--------------------

let me know if this looks okay.


What's the plan for non-pcie qmp phy binding? In that case we
don't have ports, so it gets folded into one node?

The non-pcie qmp phys still have one lane, that provides tx/rx.

I am of the opinion that we don't have two different ways to create
phys in the driver, and keep one port/lane for such phys in dt.

Ok so we would still have a subnode in that case. Sounds ok.

Cool.

Thanks
Vivek

--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux