> On Jun 27, 2016, at 2:59 AM, Sven Eckelmann <sven.eckelmann@xxxxxxxxxxxxx> wrote: > >> https://gist.github.com/anonymous/38a44876ff4d2033e16e941408561b64 >> >> This is loading an initramfs image, also the earlycon cmdline bits should > work properly as well. > > What exactly should I compare? This is 3.18 - so it is definitely not the > mainstream Linux version of the patches but most likely your own codeaurora > fork with the 2k or 4k patch bomb. This is an upstream clean tree, but I did not realize the log was crashing though also that it was a back port to 3.18. I’m searching on gists for a working log here since I don’t have access to a board. Here is one that might be relevant: https://gist.github.com/anonymous/97d752ff8d50f45b8bbc > But I've tried your bootargs. These broke the earlyprintk and didn't boot with > v4.7-rc3. So the difference here doesn't seem to be the fdt load address. I’m sure this command line works around the 4.6 timeframe. Are you sure you need the earlyprintk cmdline bit? -M-- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
