[PATCH 2/2] arm64: dts: qcom: x1e80100-t14s: Add external DP support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Lenovo Thinkpad T14s has only 2 USB Type-C ports, both of them
supporting external DP altmode. Between each QMP combo PHY and the
corresponding Type-C port, sits one Parade PS8830 retimer which handles
both orientation and SBU muxing. Add nodes for each retimer, fix the
graphs between connectors and the PHYs accordingly add the voltage
regulators needed by each retimer and then enable DP 0 and 1.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
 .../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts     | 278 ++++++++++++++++++++-
 1 file changed, 274 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
index 941dfddd6713..08ec2419f95f 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
@@ -66,7 +66,15 @@ port@1 {
 					reg = <1>;
 
 					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
 					};
 				};
 			};
@@ -95,7 +103,15 @@ port@1 {
 					reg = <1>;
 
 					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
 					};
 				};
 			};
@@ -127,6 +143,90 @@ vreg_edp_3p3: regulator-edp-3p3 {
 		regulator-boot-on;
 	};
 
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p15_reg_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p8_reg_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_3p3_reg_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr1_1p15_reg_en>;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr1_1p8_reg_en>;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr1_3p3_reg_en>;
+	};
+
 	vreg_nvme: regulator-nvme {
 		compatible = "regulator-fixed";
 
@@ -484,6 +584,111 @@ keyboard@3a {
 	};
 };
 
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+		clock-names = "xo";
+
+		vdd15-supply = <&vreg_rtmr0_1p15>;
+		vdd18-supply = <&vreg_rtmr0_1p8>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_HIGH>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+		clock-names = "xo";
+
+		vdd15-supply = <&vreg_rtmr1_1p15>;
+		vdd18-supply = <&vreg_rtmr1_1p8>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_HIGH>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+
+		};
+	};
+};
+
 &i2c8 {
 	clock-frequency = <400000>;
 
@@ -508,6 +713,22 @@ &mdss {
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1 2 3>;
+};
+
 &mdss_dp3 {
 	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
@@ -588,6 +809,33 @@ &pcie6a_phy {
 	status = "okay";
 };
 
+&pm8550_gpios {
+	rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "func1";
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "func1";
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "func1";
+		input-disable;
+		output-enable;
+	};
+};
+
 &pmc8380_3_gpios {
 	edp_bl_en: edp-bl-en-state {
 		pins = "gpio4";
@@ -733,6 +981,28 @@ wake-n-pins {
 		};
 	};
 
+	rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+
 	wcd_default: wcd-reset-n-active-state {
 		pins = "gpio191";
 		function = "gpio";
@@ -771,7 +1041,7 @@ &usb_1_ss0_dwc3_hs {
 };
 
 &usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+	remote-endpoint = <&retimer_ss0_ss_in>;
 };
 
 &usb_1_ss1_hsphy {
@@ -803,5 +1073,5 @@ &usb_1_ss1_dwc3_hs {
 };
 
 &usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+	remote-endpoint = <&retimer_ss1_ss_in>;
 };

-- 
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux