From: Douglas Anderson <dianders@xxxxxxxxxxxx> With a small modification the qcom_geni_serial_poll_bit() function could be used to poll more than just a single bit. Let's generalize it. We'll make the qcom_geni_serial_poll_bit() into just a wrapper of the general function. Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Link: https://lore.kernel.org/r/20240610152420.v4.5.Ic6411eab8d9d37acc451705f583fb535cd6dadb2@changeid Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx> --- drivers/tty/serial/qcom_geni_serial.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 4625a2e5ebfb..7029c39a9a21 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -265,8 +265,8 @@ static bool qcom_geni_serial_secondary_active(struct uart_port *uport) return readl(uport->membase + SE_GENI_STATUS) & S_GENI_CMD_ACTIVE; } -static bool qcom_geni_serial_poll_bit(struct uart_port *uport, - unsigned int offset, u32 field, bool set) +static bool qcom_geni_serial_poll_bitfield(struct uart_port *uport, + unsigned int offset, u32 field, u32 val) { u32 reg; struct qcom_geni_serial_port *port; @@ -294,7 +294,7 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport, timeout_us = DIV_ROUND_UP(timeout_us, 10) * 10; while (timeout_us) { reg = readl(uport->membase + offset); - if ((bool)(reg & field) == set) + if ((reg & field) == val) return true; udelay(10); timeout_us -= 10; @@ -302,6 +302,12 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport, return false; } +static bool qcom_geni_serial_poll_bit(struct uart_port *uport, + unsigned int offset, u32 field, bool set) +{ + return qcom_geni_serial_poll_bitfield(uport, offset, field, set ? field : 0); +} + static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size) { u32 m_cmd; -- 2.44.2
