Hi! Amazing to see this device submitted! See few comments below On Thu, Aug 29, 2024 at 01:47:13PM GMT, Jens Glathe wrote: > "Microsoft Windows Dev Kit 2023" aka "Blackrock" aka "Project Volterra" > > Device tree for the Windows Dev Kit 2023. This work > is based on the initial work of Merck Hung <merckhung@xxxxxxxxx>. > I believe you wanted to add Co-developed-by: Merck Hung <merckhung@xxxxxxxxx> and perhaps move these historical notes under --- at the end of the commit message? > Original work: https://github.com/merckhung/linux_ms_dev_kit/blob/ms-dev-kit-2023-v6.3.0/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-dev-kit-2023.dts > > This dt is more or less deducted from the Thinkpad X13s. > It contains a lot of guesswork, and also a lot of research on > what works with the Windows Dev Kit. > > It is in use and under development since May 2023, pretty stable now. > > Signed-off-by: Merck Hung <merckhung@xxxxxxxxx> > Signed-off-by: Jens Glathe <jens.glathe@xxxxxxxxxxxxxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../dts/qcom/sc8280xp-microsoft-blackrock.dts | 1334 +++++++++++++++++ > 2 files changed, 1335 insertions(+) > create mode 100644 > arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile > b/arch/arm64/boot/dts/qcom/Makefile > index 197ab325c0b9e..d71d87abdb3fb 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -191,6 +191,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-microsoft-blackrock.dtb > dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm450-lenovo-tbx605f.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm450-motorola-ali.dtb > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > new file mode 100644 > index 0000000000000..af28897f0de3d > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > @@ -0,0 +1,1334 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2021, The Linux Foundation. All rights reserved. > + * Copyright (c) 2022, Linaro Limited > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/gpio-keys.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > + > +#include "sc8280xp.dtsi" > +#include "sc8280xp-pmics.dtsi" > + > +/ { > + model = "Windows Dev Kit 2023"; Maybe "Microsoft Windows..."? > + compatible = "microsoft,win-dev-kit-2023", "qcom,sc8280xp"; I think you want to document this compatible... Have you run checkpatch.pl and make dtbs_check on this patch? > + > + aliases { > + i2c4 = &i2c4; > + i2c21 = &i2c21; > + serial1 = &uart2; > + }; > + > + wcd938x: audio-codec { > + compatible = "qcom,wcd9380-codec"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&wcd_default>; In all instances, -names usually comes after -N. > + > + reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; > + > + vdd-buck-supply = <&vreg_s10b>; > + vdd-rxtx-supply = <&vreg_s10b>; > + vdd-io-supply = <&vreg_s10b>; > + vdd-mic-bias-supply = <&vreg_bob>; > + > + qcom,micbias1-microvolt = <1800000>; > + qcom,micbias2-microvolt = <1800000>; > + qcom,micbias3-microvolt = <1800000>; > + qcom,micbias4-microvolt = <1800000>; > + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 > 500000 500000 500000 500000 500000>; This seems like this patch is indented with spaces and folded, any chance your MTA corrupted it? > + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; > + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; > + qcom,rx-device = <&wcd_rx>; > + qcom,tx-device = <&wcd_tx>; > + > + #sound-dai-cells = <1>; > + }; > + > + firmware { > + qseecom { > + compatible = "qcom,qseecom-sc8280xp", "qcom,qseecom"; > + qcom,scm = <&scm>; > + }; > + }; > + > + pmic-glink { > + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>, > + <&tlmm 49 GPIO_ACTIVE_HIGH>; > + > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "source"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_con0_hs: endpoint { > + remote-endpoint = <&usb_0_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_con0_ss: endpoint { > + remote-endpoint = <&usb_0_qmpphy_out>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + pmic_glink_con0_sbu: endpoint { > + remote-endpoint = <&usb0_sbu_mux>; > + }; > + }; > + }; > + }; > + > + connector@1 { > + compatible = "usb-c-connector"; > + reg = <1>; > + power-role = "source"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + > + pmic_glink_con1_hs: endpoint { > + remote-endpoint = <&usb_1_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_con1_ss: endpoint { > + remote-endpoint = <&usb_1_qmpphy_out>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + pmic_glink_con1_sbu: endpoint { > + remote-endpoint = <&usb1_sbu_mux>; > + }; > + }; > + }; > + }; > + }; > + > + dp1-connector@0 { > + compatible = "dp-connector"; > + label = "DP1"; > + type = "mini"; > + > + dp-pwr-supply = <&vreg_misc_3p3>; > + > + //hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; Is there a reason this is commented out? > + > + port { > + dp1_connector_in: endpoint { > + remote-endpoint = <&mdss0_dp2_phy_out>; > + }; > + }; > + }; > + > + vreg_misc_3p3: regulator-misc-3p3 { > + compatible = "regulator-fixed"; > + > + regulator-name = "VCC3B"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&misc_3p3_reg_en>; > + > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vreg_nvme: regulator-nvme { > + compatible = "regulator-fixed"; > + > + regulator-name = "VCC3_SSD"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&nvme_reg_en>; > + > + regulator-boot-on; > + }; > + > + vreg_vph_pwr: regulator-vph-pwr { > + compatible = "regulator-fixed"; > + > + regulator-name = "VPH_VCC3R9"; > + regulator-min-microvolt = <3900000>; > + regulator-max-microvolt = <3900000>; > + > + regulator-always-on; > + }; > + > + vreg_wlan: regulator-wlan { > + compatible = "regulator-fixed"; > + > + regulator-name = "VCC_WLAN_3R9"; > + regulator-min-microvolt = <3900000>; > + regulator-max-microvolt = <3900000>; > + > + gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&hastings_reg_en>; > + > + regulator-boot-on; > + }; > + > + vreg_wwan: regulator-wwan { > + compatible = "regulator-fixed"; > + > + regulator-name = "VCC3B_WAN"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&wwan_sw_en>; > + > + regulator-boot-on; > + }; > + > + reserved-memory { > + gpu_mem: gpu-mem@8bf00000 { > + reg = <0 0x8bf00000 0 0x2000>; > + no-map; > + }; > + > + linux,cma { > + compatible = "shared-dma-pool"; > + size = <0x0 0x8000000>; > + reusable; > + linux,cma-default; > + }; > + }; > + > + usb0-sbu-mux { > + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; > + > + enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; > + select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&usb0_sbu_default>; > + > + mode-switch; > + orientation-switch; > + > + port { > + usb0_sbu_mux: endpoint { > + remote-endpoint = <&pmic_glink_con0_sbu>; > + }; > + }; > + }; > + > + usb1-sbu-mux { > + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; > + > + enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; > + select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&usb1_sbu_default>; > + > + mode-switch; > + orientation-switch; > + > + port { > + usb1_sbu_mux: endpoint { > + remote-endpoint = <&pmic_glink_con1_sbu>; > + }; > + }; > + }; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm8350-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vdd-s10-supply = <&vreg_vph_pwr>; > + vdd-s11-supply = <&vreg_vph_pwr>; > + vdd-s12-supply = <&vreg_vph_pwr>; > + vdd-l1-l4-supply = <&vreg_s12b>; > + vdd-l2-l7-supply = <&vreg_bob>; > + vdd-l3-l5-supply = <&vreg_s11b>; > + vdd-l6-l9-l10-supply = <&vreg_s12b>; > + vdd-l8-supply = <&vreg_s12b>; > + > + vreg_s10b: smps10 { > + regulator-name = "vreg_s10b"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-always-on; > + }; > + > + vreg_s11b: smps11 { > + regulator-name = "vreg_s11b"; > + regulator-min-microvolt = <1272000>; > + regulator-max-microvolt = <1272000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-always-on; > + }; > + > + vreg_s12b: smps12 { > + regulator-name = "vreg_s12b"; > + regulator-min-microvolt = <984000>; > + regulator-max-microvolt = <984000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-always-on; > + }; > + > + vreg_l1b: ldo1 { > + regulator-name = "vreg_l1b"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3b: ldo3 { > + regulator-name = "vreg_l3b"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-boot-on; > + }; > + > + vreg_l4b: ldo4 { > + regulator-name = "vreg_l4b"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6b: ldo6 { > + regulator-name = "vreg_l6b"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-boot-on; > + }; > + }; > + > + regulators-1 { > + compatible = "qcom,pm8350c-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-bob-supply = <&vreg_vph_pwr>; > + vdd-l1-l12-supply = <&vreg_s1c>; > + vdd-l2-l8-supply = <&vreg_s1c>; > + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; > + vdd-l6-l9-l11-supply = <&vreg_bob>; > + vdd-l10-supply = <&vreg_s11b>; > + > + vreg_s1c: smps1 { > + regulator-name = "vreg_s1c"; > + regulator-min-microvolt = <1880000>; > + regulator-max-microvolt = <1900000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-always-on; > + }; > + > + vreg_l1c: ldo1 { > + regulator-name = "vreg_l1c"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6c: ldo6 { > + regulator-name = "vreg_l6c"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7c: ldo7 { > + regulator-name = "vreg_l7c"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <2504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8c: ldo8 { > + regulator-name = "vreg_l8c"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9c: ldo9 { > + regulator-name = "vreg_l9c"; > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12c: ldo12 { > + regulator-name = "vreg_l12c"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13c: ldo13 { > + regulator-name = "vreg_l13c"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob: bob { > + regulator-name = "vreg_bob"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; > + regulator-always-on; > + }; > + }; > + > + regulators-2 { > + compatible = "qcom,pm8350-rpmh-regulators"; > + qcom,pmic-id = "d"; > + > + vdd-l1-l4-supply = <&vreg_s11b>; > + vdd-l2-l7-supply = <&vreg_bob>; > + vdd-l3-l5-supply = <&vreg_s11b>; > + vdd-l6-l9-l10-supply = <&vreg_s12b>; > + vdd-l8-supply = <&vreg_s12b>; > + > + vreg_l2d: ldo2 { > + regulator-name = "vreg_l2d"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3d: ldo3 { > + regulator-name = "vreg_l3d"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4d: ldo4 { > + regulator-name = "vreg_l4d"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6d: ldo6 { > + regulator-name = "vreg_l6d"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7d: ldo7 { > + regulator-name = "vreg_l7d"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8d: ldo8 { > + regulator-name = "vreg_l8d"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9d: ldo9 { > + regulator-name = "vreg_l9d"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10d: ldo10 { > + regulator-name = "vreg_l10d"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&dispcc0 { > + status = "okay"; > +}; > + > +&gpu { > + status = "okay"; > + > + zap-shader { > + memory-region = <&gpu_mem>; > + firmware-name = > "qcom/sc8280xp/MICROSOFT/DEVKIT23/qcdxkmsuc8280.mbn"; > + }; > +}; > + > +&mdss0 { > + status = "okay"; > +}; > + > +&mdss0_dp0 { > + status = "okay"; > +}; > + > +&mdss0_dp0_out { > + data-lanes = <0 1>; > + remote-endpoint = <&usb_0_qmpphy_dp_in>; > +}; > + > +&mdss0_dp1 { > + status = "okay"; > +}; > + > +&mdss0_dp1_out { > + data-lanes = <0 1>; > + remote-endpoint = <&usb_1_qmpphy_dp_in>; > +}; > + > +&mdss0_dp2 { > + compatible = "qcom,sc8280xp-dp"; > + > + data-lanes = <0 1 2 3>; > + > + status = "okay"; > + > + ports { > + port@1 { > + reg = <1>; > + mdss0_dp2_phy_out: endpoint { > + remote-endpoint = <&dp1_connector_in>; > + }; > + }; > + }; > +}; > + > +&mdss0_dp2_phy { > + compatible = "qcom,sc8280xp-dp-phy"; > + > + vdda-phy-supply = <&vreg_l3b>; > + phy-supply = <&vreg_l3b>; > + vdda-pll-supply = <&vreg_l6b>; > + pll-supply = <&vreg_l6b>; > + > + status = "okay"; > +}; > + > +&pcie2a { > + aspm-no-l0s; > + max-link-speed = <16>; > + > + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; > + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; > + > + vddpe-3v3-supply = <&vreg_nvme>; > + pcie-vdda-supply = <&vreg_l7d>; > + vdda-supply = <&vreg_l7d>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie2a_default>; > + > + status = "okay"; > +}; > + > +&pcie2a_phy { > + vdda-phy-supply = <&vreg_l4d>; > + phy-supply = <&vreg_l4d>; > + vdda-pll-supply = <&vreg_l6d>; > + pll-supply = <&vreg_l6d>; > + > + status = "okay"; > +}; > + > +&pcie4 { > + max-link-speed = <2>; > + aspm-no-l0s; > + > + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; > + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; > + > + vddpe-3v3-supply = <&vreg_wlan>; > + pcie-vdda-supply = <&vreg_l7d>; > + vdda-supply = <&vreg_l7d>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie4_default>; > + > + status = "okay"; > +}; > + > +&pcie4_port0 { > + wifi@0 { > + compatible = "pci17cb,1103"; > + reg = <0x10000 0x0 0x0 0x0 0x0>; > + > + qcom,ath11k-calibration-variant = "volterra"; > + }; > +}; > + > +&pcie4_phy { > + vdda-phy-supply = <&vreg_l4d>; > + phy-supply = <&vreg_l4d>; > + vdda-pll-supply = <&vreg_l6d>; > + pll-supply = <&vreg_l6d>; > + > + status = "okay"; > +}; > + > +&pmc8280c_lpg { > + status = "okay"; > +}; > + > +&pmk8280_adc_tm { > + status = "okay"; > + > + sys-therm@0 { > + reg = <0>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@1 { > + reg = <1>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@2 { > + reg = <2>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@3 { > + reg = <3>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@4 { > + reg = <4>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@5 { > + reg = <5>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@6 { > + reg = <6>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@7 { > + reg = <7>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > +}; > + > +&pmk8280_pon_pwrkey { > + status = "okay"; > +}; > + > +&pmk8280_pon_resin { > + status = "okay"; > +}; > + > +&pmk8280_rtc { > + nvmem-cells = <&rtc_offset>; > + nvmem-cell-names = "offset"; > + > + status = "okay"; > +}; > + > +&pmk8280_sdam_6 { > + status = "okay"; > + > + rtc_offset: rtc-offset@bc { > + reg = <0xbc 0x4>; > + }; > +}; > + > +&pmk8280_vadc { > + status = "okay"; > + > + channel@144 { > + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm1"; > + }; > + > + channel@145 { > + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm2"; > + }; > + > + channel@146 { > + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm3"; > + }; > + > + channel@147 { > + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm4"; > + }; > + > + channel@344 { > + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm5"; > + }; > + > + channel@345 { > + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm6"; > + }; > + > + channel@346 { > + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm7"; > + }; > + > + channel@347 { > + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm8"; > + }; > +}; > + > +&qup0 { > + status = "okay"; > +}; > + > +&qup1 { > + status = "okay"; > +}; > + > +&qup2 { > + status = "okay"; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qcadsp8280.mbn"; > + > + status = "okay"; > +}; > + > +&remoteproc_nsp0 { > + firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qccdsp8280.mbn"; > + > + status = "okay"; > +}; > + > +&rxmacro { > + status = "okay"; > +}; > + > +&sound { > + compatible = "qcom,sc8280xp-sndcard"; > + model = "MICROSOFT/DEVKIT23/devkit23"; > + audio-routing = > + "SpkrLeft IN", "WSA_SPK1 OUT", > + "SpkrRight IN", "WSA_SPK2 OUT", > + "IN1_HPHL", "HPHL_OUT", > + "IN2_HPHR", "HPHR_OUT", > + "AMIC2", "MIC BIAS2", > + "VA DMIC0", "MIC BIAS1", > + "VA DMIC1", "MIC BIAS1", > + "VA DMIC2", "MIC BIAS3", > + "VA DMIC0", "VA MIC BIAS1", > + "VA DMIC1", "VA MIC BIAS1", > + "VA DMIC2", "VA MIC BIAS3", > + "TX SWR_ADC1", "ADC2_OUTPUT"; > + > + wcd-playback-dai-link { > + link-name = "WCD Playback"; > + cpu { > + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; > + }; > + > + codec { > + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + > + wcd-capture-dai-link { > + link-name = "WCD Capture"; > + cpu { > + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; > + }; > + > + codec { > + sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + > + wsa-dai-link { > + link-name = "WSA Playback"; > + cpu { > + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; > + }; > + > + codec { > + sound-dai = <&swr0 0>, <&wsamacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + > + va-dai-link { > + link-name = "VA Capture"; > + cpu { > + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + > + codec { > + sound-dai = <&vamacro 0>; > + }; > + }; > +}; > + > +&swr0 { > + status = "okay"; > +}; > + > +&swr1 { > + status = "okay"; > + > + wcd_rx: wcd9380-rx@0,4 { > + compatible = "sdw20217010d00"; > + reg = <0 4>; > + qcom,rx-port-mapping = <1 2 3 4 5>; > + }; > +}; > + > +&swr2 { > + status = "okay"; > + > + wcd_tx: wcd9380-tx@0,3 { > + compatible = "sdw20217010d00"; > + reg = <0 3>; > + qcom,tx-port-mapping = <1 1 2 3>; > + }; > +}; > + > +&txmacro { > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-0 = <&uart2_default>; > + pinctrl-names = "default"; > + > + status = "okay"; > + > + bluetooth { > + compatible = "qcom,wcn6855-bt"; > + > + vddio-supply = <&vreg_s10b>; > + vddbtcxmx-supply = <&vreg_s12b>; > + vddrfacmn-supply = <&vreg_s12b>; > + vddrfa0p8-supply = <&vreg_s12b>; > + vddrfa1p2-supply = <&vreg_s11b>; > + vddrfa1p7-supply = <&vreg_s1c>; > + > + max-speed = <3200000>; > + > + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; > + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; > + > + pinctrl-0 = <&bt_default>; > + pinctrl-names = "default"; > + }; > +}; > + > +&usb_0 { > + status = "okay"; > +}; > + > +&usb_0_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_0_dwc3_hs { > + remote-endpoint = <&pmic_glink_con0_hs>; > +}; > + > +&usb_0_hsphy { > + vdda-pll-supply = <&vreg_l9d>; > + vdda-phy-supply = <&vreg_l4d>; > + phy-supply = <&vreg_l4d>; > + vdda18-supply = <&vreg_l1c>; > + vdda33-supply = <&vreg_l7d>; > + > + status = "okay"; > +}; > + > +&usb_0_qmpphy { > + vdda-phy-supply = <&vreg_l4d>; > + phy-supply = <&vreg_l4d>; > + vdda-pll-supply = <&vreg_l9d>; > + pll-supply = <&vreg_l9d>; > + > + orientation-switch; > + > + status = "okay"; > +}; > + > +&usb_0_qmpphy_dp_in { > + remote-endpoint = <&mdss0_dp0_out>; > +}; > + > +&usb_0_qmpphy_out { > + remote-endpoint = <&pmic_glink_con0_ss>; > +}; > + > +&usb_1 { > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_1_dwc3_hs { > + remote-endpoint = <&pmic_glink_con1_hs>; > +}; > + > +&usb_1_hsphy { > + vdda-pll-supply = <&vreg_l4b>; > + vdda-phy-supply = <&vreg_l3b>; > + phy-supply = <&vreg_l3b>; > + vdda18-supply = <&vreg_l1c>; > + vdda33-supply = <&vreg_l13c>; > + > + status = "okay"; > +}; > + > +&usb_1_qmpphy { > + vdda-phy-supply = <&vreg_l3b>; > + phy-supply = <&vreg_l3b>; > + vdda-pll-supply = <&vreg_l4b>; > + pll-supply = <&vreg_l4b>; > + > + orientation-switch; > + > + status = "okay"; > +}; > + > +&usb_1_qmpphy_dp_in { > + remote-endpoint = <&mdss0_dp1_out>; > +}; > + > +&usb_1_qmpphy_out { > + remote-endpoint = <&pmic_glink_con1_ss>; > +}; > + > +&usb_2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb2_en_state>; > + > + status = "okay"; > +}; > + > +&usb_2_dwc3 { > + dr_mode = "host"; > + phy-names = "usb2-port0", "usb3-port0"; > + phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>; > + > + status = "okay"; > +}; > + > +&usb_2_hsphy0 { > + vdda-pll-supply = <&vreg_l1b>; > + vdda-phy-supply = <&vreg_l3d>; > + phy-supply = <&vreg_l3d>; > + vdda18-supply = <&vreg_l1c>; > + vdda33-supply = <&vreg_l7d>; > + > + status = "okay"; > +}; > + > +&usb_2_hsphy1 { > + vdda-pll-supply = <&vreg_l8d>; > + vdda-phy-supply = <&vreg_l3d>; > + phy-supply = <&vreg_l3d>; > + vdda18-supply = <&vreg_l1c>; > + vdda33-supply = <&vreg_l7d>; > + > + status = "okay"; > +}; > + > +&usb_2_hsphy2 { > + vdda-pll-supply = <&vreg_l10d>; > + vdda-phy-supply = <&vreg_l3d>; > + phy-supply = <&vreg_l3d>; > + vdda18-supply = <&vreg_l8c>; > + vdda33-supply = <&vreg_l2d>; > + > + status = "okay"; > +}; > + > +&usb_2_hsphy3 { > + vdda-pll-supply = <&vreg_l10d>; > + vdda-phy-supply = <&vreg_l3d>; > + phy-supply = <&vreg_l3d>; > + vdda18-supply = <&vreg_l8c>; > + vdda33-supply = <&vreg_l2d>; > + > + status = "okay"; > +}; > + > +&usb_2_qmpphy0 { > + vdda-phy-supply = <&vreg_l1b>; > + phy-supply = <&vreg_l1b>; > + vdda-pll-supply = <&vreg_l4d>; > + pll-supply = <&vreg_l4d>; > + status = "okay"; > +}; > + > +&usb_2_qmpphy1 { > + vdda-phy-supply = <&vreg_l8d>; > + phy-supply = <&vreg_l8d>; > + vdda-pll-supply = <&vreg_l4d>; > + pll-supply = <&vreg_l4d>; > + status = "okay"; > +}; > + > +&vamacro { > + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; > + pinctrl-names = "default"; > + > + vdd-micb-supply = <&vreg_s10b>; > + > + qcom,dmic-sample-rate = <4800000>; > + > + status = "okay"; > +}; > + > +&wsamacro { > + status = "okay"; > +}; > + > +&xo_board_clk { > + clock-frequency = <38400000>; > +}; > + > +/* PINCTRL */ > + > +&lpass_tlmm { > + status = "okay"; > +}; > + > +&pmc8280_1_gpios { > + edp_bl_en: edp-bl-en-state { > + pins = "gpio8"; > + function = "normal"; > + }; > + > + edp_bl_reg_en: edp-bl-reg-en-state { > + pins = "gpio9"; > + function = "normal"; > + }; > + > + misc_3p3_reg_en: misc-3p3-reg-en-state { > + pins = "gpio1"; > + function = "normal"; > + }; > +}; > + > +&pmc8280_2_gpios { > + wwan_sw_en: wwan-sw-en-state { > + pins = "gpio1"; > + function = "normal"; > + }; > +}; > + > +&pmc8280c_gpios { > + edp_bl_pwm: edp-bl-pwm-state { > + pins = "gpio8"; > + function = "func1"; > + }; > +}; > + > +&pmr735a_gpios { > + hastings_reg_en: hastings-reg-en-state { > + pins = "gpio1"; > + function = "normal"; > + }; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>; > + > + bt_default: bt-default-state { > + hstp-bt-en-pins { > + pins = "gpio133"; > + function = "gpio"; > + drive-strength = <16>; > + bias-disable; > + }; > + > + hstp-sw-ctrl-pins { > + pins = "gpio132"; > + function = "gpio"; > + bias-pull-down; > + }; > + }; > + > + nvme_reg_en: nvme-reg-en-state { > + pins = "gpio135"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + pcie2a_default: pcie2a-default-state { > + clkreq-n-pins { > + pins = "gpio142"; > + function = "pcie2a_clkreq"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + perst-n-pins { > + pins = "gpio143"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + wake-n-pins { > + pins = "gpio145"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > + pcie3a_default: pcie3a-default-state { > + clkreq-n-pins { > + pins = "gpio150"; > + function = "pcie3a_clkreq"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + perst-n-pins { > + pins = "gpio151"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + wake-n-pins { > + pins = "gpio148"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > + pcie4_default: pcie4-default-state { > + clkreq-n-pins { > + pins = "gpio140"; > + function = "pcie4_clkreq"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + perst-n-pins { > + pins = "gpio141"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + wake-n-pins { > + pins = "gpio139"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > + uart2_default: uart2-default-state { > + cts-pins { > + pins = "gpio121"; > + function = "qup2"; > + bias-bus-hold; > + }; > + > + rts-pins { > + pins = "gpio122"; > + function = "qup2"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + rx-pins { > + pins = "gpio124"; > + function = "qup2"; > + bias-pull-up; > + }; > + > + tx-pins { > + pins = "gpio123"; > + function = "qup2"; > + drive-strength = <2>; > + bias-disable; > + }; > + }; > + > + usb0_sbu_default: usb0-sbu-state { > + oe-n-pins { > + pins = "gpio101"; > + function = "gpio"; > + bias-disable; > + drive-strength = <16>; > + output-high; > + }; > + > + sel-pins { > + pins = "gpio164"; > + function = "gpio"; > + bias-disable; > + drive-strength = <16>; > + }; > + }; > + > + usb1_sbu_default: usb1-sbu-state { > + oe-n-pins { > + pins = "gpio48"; > + function = "gpio"; > + bias-disable; > + drive-strength = <16>; > + output-high; > + }; > + > + sel-pins { > + pins = "gpio47"; > + function = "gpio"; > + bias-disable; > + drive-strength = <16>; > + }; > + }; > + > + usb2_en_state: usb2-en-state { > + /* TS3USB221A USB2.0 mux select */ > + pins = "gpio24"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + output-low; > + }; > + > + wcd_default: wcd-default-state { > + reset-pins { > + pins = "gpio106"; > + function = "gpio"; > + bias-disable; > + }; > + }; > +}; > -- > 2.43.0 >
