[PATCH v1] arm64: dts: qcom: sc8280xp-wdk2023: dt definition for WDK2023

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



"Microsoft Windows Dev Kit 2023" aka "Blackrock" aka "Project Volterra"

Device tree for the Windows Dev Kit 2023. This work
is based on the initial work of Merck Hung <merckhung@xxxxxxxxx>.

Original work: https://github.com/merckhung/linux_ms_dev_kit/blob/ms-dev-kit-2023-v6.3.0/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-dev-kit-2023.dts

This dt is more or less deducted from the Thinkpad X13s.
It contains a lot of guesswork, and also a lot of research on
what works with the Windows Dev Kit.

It is in use and under development since May 2023, pretty stable now.

Signed-off-by: Merck Hung <merckhung@xxxxxxxxx>
Signed-off-by: Jens Glathe <jens.glathe@xxxxxxxxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 .../dts/qcom/sc8280xp-microsoft-blackrock.dts | 1334 +++++++++++++++++
 2 files changed, 1335 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 197ab325c0b9e..d71d87abdb3fb 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -191,6 +191,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += sc8180x-lenovo-flex-5g.dtb
 dtb-$(CONFIG_ARCH_QCOM)    += sc8180x-primus.dtb
 dtb-$(CONFIG_ARCH_QCOM)    += sc8280xp-crd.dtb
 dtb-$(CONFIG_ARCH_QCOM)    += sc8280xp-lenovo-thinkpad-x13s.dtb
+dtb-$(CONFIG_ARCH_QCOM)    += sc8280xp-microsoft-blackrock.dtb
 dtb-$(CONFIG_ARCH_QCOM)    += sda660-inforce-ifc6560.dtb
 dtb-$(CONFIG_ARCH_QCOM)    += sdm450-lenovo-tbx605f.dtb
 dtb-$(CONFIG_ARCH_QCOM)    += sdm450-motorola-ali.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
new file mode 100644
index 0000000000000..af28897f0de3d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
@@ -0,0 +1,1334 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+    model = "Windows Dev Kit 2023";
+    compatible = "microsoft,win-dev-kit-2023", "qcom,sc8280xp";
+
+    aliases {
+        i2c4 = &i2c4;
+        i2c21 = &i2c21;
+        serial1 = &uart2;
+    };
+
+    wcd938x: audio-codec {
+        compatible = "qcom,wcd9380-codec";
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&wcd_default>;
+
+        reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+        vdd-buck-supply = <&vreg_s10b>;
+        vdd-rxtx-supply = <&vreg_s10b>;
+        vdd-io-supply = <&vreg_s10b>;
+        vdd-mic-bias-supply = <&vreg_bob>;
+
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+        qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+        qcom,rx-device = <&wcd_rx>;
+        qcom,tx-device = <&wcd_tx>;
+
+        #sound-dai-cells = <1>;
+    };
+
+    firmware {
+        qseecom {
+            compatible = "qcom,qseecom-sc8280xp", "qcom,qseecom";
+            qcom,scm = <&scm>;
+        };
+    };
+
+    pmic-glink {
+        compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+        orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
+                    <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+        connector@0 {
+            compatible = "usb-c-connector";
+            reg = <0>;
+            power-role = "source";
+            data-role = "dual";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    pmic_glink_con0_hs: endpoint {
+                        remote-endpoint = <&usb_0_dwc3_hs>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    pmic_glink_con0_ss: endpoint {
+                        remote-endpoint = <&usb_0_qmpphy_out>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    pmic_glink_con0_sbu: endpoint {
+                        remote-endpoint = <&usb0_sbu_mux>;
+                    };
+                };
+            };
+        };
+
+        connector@1 {
+            compatible = "usb-c-connector";
+            reg = <1>;
+            power-role = "source";
+            data-role = "dual";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+
+                    pmic_glink_con1_hs: endpoint {
+                        remote-endpoint = <&usb_1_dwc3_hs>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    pmic_glink_con1_ss: endpoint {
+                        remote-endpoint = <&usb_1_qmpphy_out>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    pmic_glink_con1_sbu: endpoint {
+                        remote-endpoint = <&usb1_sbu_mux>;
+                    };
+                };
+            };
+        };
+    };
+
+    dp1-connector@0 {
+        compatible = "dp-connector";
+        label = "DP1";
+        type = "mini";
+
+        dp-pwr-supply = <&vreg_misc_3p3>;
+
+        //hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+        port {
+            dp1_connector_in: endpoint {
+                remote-endpoint = <&mdss0_dp2_phy_out>;
+            };
+        };
+    };
+
+    vreg_misc_3p3: regulator-misc-3p3 {
+        compatible = "regulator-fixed";
+
+        regulator-name = "VCC3B";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+
+        gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+        enable-active-high;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&misc_3p3_reg_en>;
+
+        regulator-boot-on;
+        regulator-always-on;
+    };
+
+    vreg_nvme: regulator-nvme {
+        compatible = "regulator-fixed";
+
+        regulator-name = "VCC3_SSD";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+
+        gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+        enable-active-high;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&nvme_reg_en>;
+
+        regulator-boot-on;
+    };
+
+    vreg_vph_pwr: regulator-vph-pwr {
+        compatible = "regulator-fixed";
+
+        regulator-name = "VPH_VCC3R9";
+        regulator-min-microvolt = <3900000>;
+        regulator-max-microvolt = <3900000>;
+
+        regulator-always-on;
+    };
+
+    vreg_wlan: regulator-wlan {
+        compatible = "regulator-fixed";
+
+        regulator-name = "VCC_WLAN_3R9";
+        regulator-min-microvolt = <3900000>;
+        regulator-max-microvolt = <3900000>;
+
+        gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+        enable-active-high;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&hastings_reg_en>;
+
+        regulator-boot-on;
+    };
+
+    vreg_wwan: regulator-wwan {
+        compatible = "regulator-fixed";
+
+        regulator-name = "VCC3B_WAN";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+
+        gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+        enable-active-high;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&wwan_sw_en>;
+
+        regulator-boot-on;
+    };
+
+    reserved-memory {
+        gpu_mem: gpu-mem@8bf00000 {
+            reg = <0 0x8bf00000 0 0x2000>;
+            no-map;
+        };
+
+        linux,cma {
+            compatible = "shared-dma-pool";
+            size = <0x0 0x8000000>;
+            reusable;
+            linux,cma-default;
+        };
+    };
+
+    usb0-sbu-mux {
+        compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+        enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+        select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&usb0_sbu_default>;
+
+        mode-switch;
+        orientation-switch;
+
+        port {
+            usb0_sbu_mux: endpoint {
+                remote-endpoint = <&pmic_glink_con0_sbu>;
+            };
+        };
+    };
+
+    usb1-sbu-mux {
+        compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+        enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+        select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&usb1_sbu_default>;
+
+        mode-switch;
+        orientation-switch;
+
+        port {
+            usb1_sbu_mux: endpoint {
+                remote-endpoint = <&pmic_glink_con1_sbu>;
+            };
+        };
+    };
+};
+
+&apps_rsc {
+    regulators-0 {
+        compatible = "qcom,pm8350-rpmh-regulators";
+        qcom,pmic-id = "b";
+
+        vdd-s10-supply = <&vreg_vph_pwr>;
+        vdd-s11-supply = <&vreg_vph_pwr>;
+        vdd-s12-supply = <&vreg_vph_pwr>;
+        vdd-l1-l4-supply = <&vreg_s12b>;
+        vdd-l2-l7-supply = <&vreg_bob>;
+        vdd-l3-l5-supply = <&vreg_s11b>;
+        vdd-l6-l9-l10-supply = <&vreg_s12b>;
+        vdd-l8-supply = <&vreg_s12b>;
+
+        vreg_s10b: smps10 {
+            regulator-name = "vreg_s10b";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+            regulator-always-on;
+        };
+
+        vreg_s11b: smps11 {
+            regulator-name = "vreg_s11b";
+            regulator-min-microvolt = <1272000>;
+            regulator-max-microvolt = <1272000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+            regulator-always-on;
+        };
+
+        vreg_s12b: smps12 {
+            regulator-name = "vreg_s12b";
+            regulator-min-microvolt = <984000>;
+            regulator-max-microvolt = <984000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+            regulator-always-on;
+        };
+
+        vreg_l1b: ldo1 {
+            regulator-name = "vreg_l1b";
+            regulator-min-microvolt = <912000>;
+            regulator-max-microvolt = <912000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l3b: ldo3 {
+            regulator-name = "vreg_l3b";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+            regulator-boot-on;
+        };
+
+        vreg_l4b: ldo4 {
+            regulator-name = "vreg_l4b";
+            regulator-min-microvolt = <912000>;
+            regulator-max-microvolt = <912000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l6b: ldo6 {
+            regulator-name = "vreg_l6b";
+            regulator-min-microvolt = <880000>;
+            regulator-max-microvolt = <880000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+            regulator-boot-on;
+        };
+    };
+
+    regulators-1 {
+        compatible = "qcom,pm8350c-rpmh-regulators";
+        qcom,pmic-id = "c";
+
+        vdd-bob-supply = <&vreg_vph_pwr>;
+        vdd-l1-l12-supply = <&vreg_s1c>;
+        vdd-l2-l8-supply = <&vreg_s1c>;
+        vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+        vdd-l6-l9-l11-supply = <&vreg_bob>;
+        vdd-l10-supply = <&vreg_s11b>;
+
+        vreg_s1c: smps1 {
+            regulator-name = "vreg_s1c";
+            regulator-min-microvolt = <1880000>;
+            regulator-max-microvolt = <1900000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+            regulator-always-on;
+        };
+
+        vreg_l1c: ldo1 {
+            regulator-name = "vreg_l1c";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l6c: ldo6 {
+            regulator-name = "vreg_l6c";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <2960000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l7c: ldo7 {
+            regulator-name = "vreg_l7c";
+            regulator-min-microvolt = <2504000>;
+            regulator-max-microvolt = <2504000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+            regulator-allow-set-load;
+            regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                           RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l8c: ldo8 {
+            regulator-name = "vreg_l8c";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l9c: ldo9 {
+            regulator-name = "vreg_l9c";
+            regulator-min-microvolt = <2960000>;
+            regulator-max-microvolt = <2960000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l12c: ldo12 {
+            regulator-name = "vreg_l12c";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l13c: ldo13 {
+            regulator-name = "vreg_l13c";
+            regulator-min-microvolt = <3072000>;
+            regulator-max-microvolt = <3072000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_bob: bob {
+            regulator-name = "vreg_bob";
+            regulator-min-microvolt = <3008000>;
+            regulator-max-microvolt = <3960000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+            regulator-always-on;
+        };
+    };
+
+    regulators-2 {
+        compatible = "qcom,pm8350-rpmh-regulators";
+        qcom,pmic-id = "d";
+
+        vdd-l1-l4-supply = <&vreg_s11b>;
+        vdd-l2-l7-supply = <&vreg_bob>;
+        vdd-l3-l5-supply = <&vreg_s11b>;
+        vdd-l6-l9-l10-supply = <&vreg_s12b>;
+        vdd-l8-supply = <&vreg_s12b>;
+
+        vreg_l2d: ldo2 {
+            regulator-name = "vreg_l2d";
+            regulator-min-microvolt = <3072000>;
+            regulator-max-microvolt = <3072000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l3d: ldo3 {
+            regulator-name = "vreg_l3d";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+            regulator-allow-set-load;
+            regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                           RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l4d: ldo4 {
+            regulator-name = "vreg_l4d";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l6d: ldo6 {
+            regulator-name = "vreg_l6d";
+            regulator-min-microvolt = <880000>;
+            regulator-max-microvolt = <880000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l7d: ldo7 {
+            regulator-name = "vreg_l7d";
+            regulator-min-microvolt = <3072000>;
+            regulator-max-microvolt = <3072000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l8d: ldo8 {
+            regulator-name = "vreg_l8d";
+            regulator-min-microvolt = <912000>;
+            regulator-max-microvolt = <912000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l9d: ldo9 {
+            regulator-name = "vreg_l9d";
+            regulator-min-microvolt = <912000>;
+            regulator-max-microvolt = <912000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+
+        vreg_l10d: ldo10 {
+            regulator-name = "vreg_l10d";
+            regulator-min-microvolt = <912000>;
+            regulator-max-microvolt = <912000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+        };
+    };
+};
+
+&dispcc0 {
+    status = "okay";
+};
+
+&gpu {
+    status = "okay";
+
+    zap-shader {
+        memory-region = <&gpu_mem>;
+        firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qcdxkmsuc8280.mbn";
+    };
+};
+
+&mdss0 {
+    status = "okay";
+};
+
+&mdss0_dp0 {
+    status = "okay";
+};
+
+&mdss0_dp0_out {
+    data-lanes = <0 1>;
+    remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+    status = "okay";
+};
+
+&mdss0_dp1_out {
+    data-lanes = <0 1>;
+    remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss0_dp2 {
+  compatible = "qcom,sc8280xp-dp";
+
+  data-lanes = <0 1 2 3>;
+
+    status = "okay";
+
+    ports {
+        port@1 {
+            reg = <1>;
+            mdss0_dp2_phy_out: endpoint {
+                remote-endpoint = <&dp1_connector_in>;
+            };
+        };
+    };
+};
+
+&mdss0_dp2_phy {
+    compatible = "qcom,sc8280xp-dp-phy";
+
+    vdda-phy-supply = <&vreg_l3b>;
+    phy-supply = <&vreg_l3b>;
+    vdda-pll-supply = <&vreg_l6b>;
+    pll-supply = <&vreg_l6b>;
+
+    status = "okay";
+};
+
+&pcie2a {
+    aspm-no-l0s;
+    max-link-speed = <16>;
+
+    perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+    wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+    vddpe-3v3-supply = <&vreg_nvme>;
+    pcie-vdda-supply = <&vreg_l7d>;
+    vdda-supply = <&vreg_l7d>;
+
+    pinctrl-names = "default";
+    pinctrl-0 = <&pcie2a_default>;
+
+    status = "okay";
+};
+
+&pcie2a_phy {
+    vdda-phy-supply = <&vreg_l4d>;
+    phy-supply = <&vreg_l4d>;
+    vdda-pll-supply = <&vreg_l6d>;
+    pll-supply = <&vreg_l6d>;
+
+    status = "okay";
+};
+
+&pcie4 {
+    max-link-speed = <2>;
+    aspm-no-l0s;
+
+    perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+    wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+    vddpe-3v3-supply = <&vreg_wlan>;
+    pcie-vdda-supply = <&vreg_l7d>;
+    vdda-supply = <&vreg_l7d>;
+
+    pinctrl-names = "default";
+    pinctrl-0 = <&pcie4_default>;
+
+    status = "okay";
+};
+
+&pcie4_port0 {
+    wifi@0 {
+        compatible = "pci17cb,1103";
+        reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+        qcom,ath11k-calibration-variant = "volterra";
+    };
+};
+
+&pcie4_phy {
+    vdda-phy-supply = <&vreg_l4d>;
+    phy-supply = <&vreg_l4d>;
+    vdda-pll-supply = <&vreg_l6d>;
+    pll-supply = <&vreg_l6d>;
+
+    status = "okay";
+};
+
+&pmc8280c_lpg {
+    status = "okay";
+};
+
+&pmk8280_adc_tm {
+    status = "okay";
+
+    sys-therm@0 {
+        reg = <0>;
+        io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+        qcom,hw-settle-time-us = <200>;
+        qcom,avg-samples = <2>;
+        qcom,ratiometric;
+    };
+
+    sys-therm@1 {
+        reg = <1>;
+        io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+        qcom,hw-settle-time-us = <200>;
+        qcom,avg-samples = <2>;
+        qcom,ratiometric;
+    };
+
+    sys-therm@2 {
+        reg = <2>;
+        io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+        qcom,hw-settle-time-us = <200>;
+        qcom,avg-samples = <2>;
+        qcom,ratiometric;
+    };
+
+    sys-therm@3 {
+        reg = <3>;
+        io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+        qcom,hw-settle-time-us = <200>;
+        qcom,avg-samples = <2>;
+        qcom,ratiometric;
+    };
+
+    sys-therm@4 {
+        reg = <4>;
+        io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+        qcom,hw-settle-time-us = <200>;
+        qcom,avg-samples = <2>;
+        qcom,ratiometric;
+    };
+
+    sys-therm@5 {
+        reg = <5>;
+        io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+        qcom,hw-settle-time-us = <200>;
+        qcom,avg-samples = <2>;
+        qcom,ratiometric;
+    };
+
+    sys-therm@6 {
+        reg = <6>;
+        io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+        qcom,hw-settle-time-us = <200>;
+        qcom,avg-samples = <2>;
+        qcom,ratiometric;
+    };
+
+    sys-therm@7 {
+        reg = <7>;
+        io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+        qcom,hw-settle-time-us = <200>;
+        qcom,avg-samples = <2>;
+        qcom,ratiometric;
+    };
+};
+
+&pmk8280_pon_pwrkey {
+    status = "okay";
+};
+
+&pmk8280_pon_resin {
+    status = "okay";
+};
+
+&pmk8280_rtc {
+    nvmem-cells = <&rtc_offset>;
+    nvmem-cell-names = "offset";
+
+    status = "okay";
+};
+
+&pmk8280_sdam_6 {
+    status = "okay";
+
+    rtc_offset: rtc-offset@bc {
+        reg = <0xbc 0x4>;
+    };
+};
+
+&pmk8280_vadc {
+    status = "okay";
+
+    channel@144 {
+        reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+        qcom,hw-settle-time = <200>;
+        qcom,ratiometric;
+        label = "sys_therm1";
+    };
+
+    channel@145 {
+        reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+        qcom,hw-settle-time = <200>;
+        qcom,ratiometric;
+        label = "sys_therm2";
+    };
+
+    channel@146 {
+        reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+        qcom,hw-settle-time = <200>;
+        qcom,ratiometric;
+        label = "sys_therm3";
+    };
+
+    channel@147 {
+        reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+        qcom,hw-settle-time = <200>;
+        qcom,ratiometric;
+        label = "sys_therm4";
+    };
+
+    channel@344 {
+        reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+        qcom,hw-settle-time = <200>;
+        qcom,ratiometric;
+        label = "sys_therm5";
+    };
+
+    channel@345 {
+        reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+        qcom,hw-settle-time = <200>;
+        qcom,ratiometric;
+        label = "sys_therm6";
+    };
+
+    channel@346 {
+        reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+        qcom,hw-settle-time = <200>;
+        qcom,ratiometric;
+        label = "sys_therm7";
+    };
+
+    channel@347 {
+        reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+        qcom,hw-settle-time = <200>;
+        qcom,ratiometric;
+        label = "sys_therm8";
+    };
+};
+
+&qup0 {
+    status = "okay";
+};
+
+&qup1 {
+    status = "okay";
+};
+
+&qup2 {
+    status = "okay";
+};
+
+&remoteproc_adsp {
+    firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qcadsp8280.mbn";
+
+    status = "okay";
+};
+
+&remoteproc_nsp0 {
+    firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qccdsp8280.mbn";
+
+    status = "okay";
+};
+
+&rxmacro {
+    status = "okay";
+};
+
+&sound {
+    compatible = "qcom,sc8280xp-sndcard";
+    model = "MICROSOFT/DEVKIT23/devkit23";
+    audio-routing =
+        "SpkrLeft IN", "WSA_SPK1 OUT",
+        "SpkrRight IN", "WSA_SPK2 OUT",
+        "IN1_HPHL", "HPHL_OUT",
+        "IN2_HPHR", "HPHR_OUT",
+        "AMIC2", "MIC BIAS2",
+        "VA DMIC0", "MIC BIAS1",
+        "VA DMIC1", "MIC BIAS1",
+        "VA DMIC2", "MIC BIAS3",
+        "VA DMIC0", "VA MIC BIAS1",
+        "VA DMIC1", "VA MIC BIAS1",
+        "VA DMIC2", "VA MIC BIAS3",
+        "TX SWR_ADC1", "ADC2_OUTPUT";
+
+    wcd-playback-dai-link {
+        link-name = "WCD Playback";
+        cpu {
+            sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+        };
+
+        codec {
+            sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+        };
+
+        platform {
+            sound-dai = <&q6apm>;
+        };
+    };
+
+    wcd-capture-dai-link {
+        link-name = "WCD Capture";
+        cpu {
+            sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+        };
+
+        codec {
+            sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+        };
+
+        platform {
+            sound-dai = <&q6apm>;
+        };
+    };
+
+    wsa-dai-link {
+        link-name = "WSA Playback";
+        cpu {
+            sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+        };
+
+        codec {
+            sound-dai = <&swr0 0>, <&wsamacro 0>;
+        };
+
+        platform {
+            sound-dai = <&q6apm>;
+        };
+    };
+
+    va-dai-link {
+        link-name = "VA Capture";
+        cpu {
+            sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+        };
+
+        platform {
+            sound-dai = <&q6apm>;
+        };
+
+        codec {
+            sound-dai = <&vamacro 0>;
+        };
+    };
+};
+
+&swr0 {
+    status = "okay";
+};
+
+&swr1 {
+    status = "okay";
+
+    wcd_rx: wcd9380-rx@0,4 {
+        compatible = "sdw20217010d00";
+        reg = <0 4>;
+        qcom,rx-port-mapping = <1 2 3 4 5>;
+    };
+};
+
+&swr2 {
+    status = "okay";
+
+    wcd_tx: wcd9380-tx@0,3 {
+        compatible = "sdw20217010d00";
+        reg = <0 3>;
+        qcom,tx-port-mapping = <1 1 2 3>;
+    };
+};
+
+&txmacro {
+    status = "okay";
+};
+
+&uart2 {
+    pinctrl-0 = <&uart2_default>;
+    pinctrl-names = "default";
+
+    status = "okay";
+
+    bluetooth {
+        compatible = "qcom,wcn6855-bt";
+
+        vddio-supply = <&vreg_s10b>;
+        vddbtcxmx-supply = <&vreg_s12b>;
+        vddrfacmn-supply = <&vreg_s12b>;
+        vddrfa0p8-supply = <&vreg_s12b>;
+        vddrfa1p2-supply = <&vreg_s11b>;
+        vddrfa1p7-supply = <&vreg_s1c>;
+
+        max-speed = <3200000>;
+
+        enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+        swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+        pinctrl-0 = <&bt_default>;
+        pinctrl-names = "default";
+    };
+};
+
+&usb_0 {
+    status = "okay";
+};
+
+&usb_0_dwc3 {
+    dr_mode = "host";
+};
+
+&usb_0_dwc3_hs {
+    remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_0_hsphy {
+    vdda-pll-supply = <&vreg_l9d>;
+    vdda-phy-supply = <&vreg_l4d>;
+    phy-supply = <&vreg_l4d>;
+    vdda18-supply = <&vreg_l1c>;
+    vdda33-supply = <&vreg_l7d>;
+
+    status = "okay";
+};
+
+&usb_0_qmpphy {
+    vdda-phy-supply = <&vreg_l4d>;
+    phy-supply = <&vreg_l4d>;
+    vdda-pll-supply = <&vreg_l9d>;
+    pll-supply = <&vreg_l9d>;
+
+    orientation-switch;
+
+    status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+    remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+    remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_1 {
+    status = "okay";
+};
+
+&usb_1_dwc3 {
+    dr_mode = "host";
+};
+
+&usb_1_dwc3_hs {
+    remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&usb_1_hsphy {
+    vdda-pll-supply = <&vreg_l4b>;
+    vdda-phy-supply = <&vreg_l3b>;
+    phy-supply = <&vreg_l3b>;
+    vdda18-supply = <&vreg_l1c>;
+    vdda33-supply = <&vreg_l13c>;
+
+    status = "okay";
+};
+
+&usb_1_qmpphy {
+    vdda-phy-supply = <&vreg_l3b>;
+    phy-supply = <&vreg_l3b>;
+    vdda-pll-supply = <&vreg_l4b>;
+    pll-supply = <&vreg_l4b>;
+
+    orientation-switch;
+
+    status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+    remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+    remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_2 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&usb2_en_state>;
+
+    status = "okay";
+};
+
+&usb_2_dwc3 {
+    dr_mode = "host";
+    phy-names = "usb2-port0", "usb3-port0";
+    phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>;
+
+    status = "okay";
+};
+
+&usb_2_hsphy0 {
+    vdda-pll-supply = <&vreg_l1b>;
+    vdda-phy-supply = <&vreg_l3d>;
+    phy-supply = <&vreg_l3d>;
+    vdda18-supply = <&vreg_l1c>;
+    vdda33-supply = <&vreg_l7d>;
+
+    status = "okay";
+};
+
+&usb_2_hsphy1 {
+    vdda-pll-supply = <&vreg_l8d>;
+    vdda-phy-supply = <&vreg_l3d>;
+    phy-supply = <&vreg_l3d>;
+    vdda18-supply = <&vreg_l1c>;
+    vdda33-supply = <&vreg_l7d>;
+
+    status = "okay";
+};
+
+&usb_2_hsphy2 {
+    vdda-pll-supply = <&vreg_l10d>;
+    vdda-phy-supply = <&vreg_l3d>;
+    phy-supply = <&vreg_l3d>;
+    vdda18-supply = <&vreg_l8c>;
+    vdda33-supply = <&vreg_l2d>;
+
+    status = "okay";
+};
+
+&usb_2_hsphy3 {
+    vdda-pll-supply = <&vreg_l10d>;
+    vdda-phy-supply = <&vreg_l3d>;
+    phy-supply = <&vreg_l3d>;
+    vdda18-supply = <&vreg_l8c>;
+    vdda33-supply = <&vreg_l2d>;
+
+    status = "okay";
+};
+
+&usb_2_qmpphy0 {
+    vdda-phy-supply = <&vreg_l1b>;
+    phy-supply = <&vreg_l1b>;
+    vdda-pll-supply = <&vreg_l4d>;
+    pll-supply = <&vreg_l4d>;
+    status = "okay";
+};
+
+&usb_2_qmpphy1 {
+    vdda-phy-supply = <&vreg_l8d>;
+    phy-supply = <&vreg_l8d>;
+    vdda-pll-supply = <&vreg_l4d>;
+    pll-supply = <&vreg_l4d>;
+    status = "okay";
+};
+
+&vamacro {
+    pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+    pinctrl-names = "default";
+
+    vdd-micb-supply = <&vreg_s10b>;
+
+    qcom,dmic-sample-rate = <4800000>;
+
+    status = "okay";
+};
+
+&wsamacro {
+    status = "okay";
+};
+
+&xo_board_clk {
+    clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+    status = "okay";
+};
+
+&pmc8280_1_gpios {
+    edp_bl_en: edp-bl-en-state {
+        pins = "gpio8";
+        function = "normal";
+    };
+
+    edp_bl_reg_en: edp-bl-reg-en-state {
+        pins = "gpio9";
+        function = "normal";
+    };
+
+    misc_3p3_reg_en: misc-3p3-reg-en-state {
+        pins = "gpio1";
+        function = "normal";
+    };
+};
+
+&pmc8280_2_gpios {
+    wwan_sw_en: wwan-sw-en-state {
+        pins = "gpio1";
+        function = "normal";
+    };
+};
+
+&pmc8280c_gpios {
+    edp_bl_pwm: edp-bl-pwm-state {
+        pins = "gpio8";
+        function = "func1";
+    };
+};
+
+&pmr735a_gpios {
+    hastings_reg_en: hastings-reg-en-state {
+        pins = "gpio1";
+        function = "normal";
+    };
+};
+
+&tlmm {
+    gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>;
+
+    bt_default: bt-default-state {
+        hstp-bt-en-pins {
+            pins = "gpio133";
+            function = "gpio";
+            drive-strength = <16>;
+            bias-disable;
+        };
+
+        hstp-sw-ctrl-pins {
+            pins = "gpio132";
+            function = "gpio";
+            bias-pull-down;
+        };
+    };
+
+    nvme_reg_en: nvme-reg-en-state {
+        pins = "gpio135";
+        function = "gpio";
+        drive-strength = <2>;
+        bias-disable;
+    };
+
+    pcie2a_default: pcie2a-default-state {
+        clkreq-n-pins {
+            pins = "gpio142";
+            function = "pcie2a_clkreq";
+            drive-strength = <2>;
+            bias-pull-up;
+        };
+
+        perst-n-pins {
+            pins = "gpio143";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-disable;
+        };
+
+        wake-n-pins {
+            pins = "gpio145";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-pull-up;
+        };
+    };
+
+    pcie3a_default: pcie3a-default-state {
+        clkreq-n-pins {
+            pins = "gpio150";
+            function = "pcie3a_clkreq";
+            drive-strength = <2>;
+            bias-pull-up;
+        };
+
+        perst-n-pins {
+            pins = "gpio151";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-disable;
+        };
+
+        wake-n-pins {
+            pins = "gpio148";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-pull-up;
+        };
+    };
+
+    pcie4_default: pcie4-default-state {
+        clkreq-n-pins {
+            pins = "gpio140";
+            function = "pcie4_clkreq";
+            drive-strength = <2>;
+            bias-pull-up;
+        };
+
+        perst-n-pins {
+            pins = "gpio141";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-disable;
+        };
+
+        wake-n-pins {
+            pins = "gpio139";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-pull-up;
+        };
+    };
+
+    uart2_default: uart2-default-state {
+        cts-pins {
+            pins = "gpio121";
+            function = "qup2";
+            bias-bus-hold;
+        };
+
+        rts-pins {
+            pins = "gpio122";
+            function = "qup2";
+            drive-strength = <2>;
+            bias-disable;
+        };
+
+        rx-pins {
+            pins = "gpio124";
+            function = "qup2";
+            bias-pull-up;
+        };
+
+        tx-pins {
+            pins = "gpio123";
+            function = "qup2";
+            drive-strength = <2>;
+            bias-disable;
+        };
+    };
+
+    usb0_sbu_default: usb0-sbu-state {
+        oe-n-pins {
+            pins = "gpio101";
+            function = "gpio";
+            bias-disable;
+            drive-strength = <16>;
+            output-high;
+        };
+
+        sel-pins {
+            pins = "gpio164";
+            function = "gpio";
+            bias-disable;
+            drive-strength = <16>;
+        };
+    };
+
+    usb1_sbu_default: usb1-sbu-state {
+        oe-n-pins {
+            pins = "gpio48";
+            function = "gpio";
+            bias-disable;
+            drive-strength = <16>;
+            output-high;
+        };
+
+        sel-pins {
+            pins = "gpio47";
+            function = "gpio";
+            bias-disable;
+            drive-strength = <16>;
+        };
+    };
+
+    usb2_en_state: usb2-en-state {
+        /* TS3USB221A USB2.0 mux select */
+        pins = "gpio24";
+        function = "gpio";
+        drive-strength = <2>;
+        bias-disable;
+        output-low;
+    };
+
+    wcd_default: wcd-default-state {
+        reset-pins {
+            pins = "gpio106";
+            function = "gpio";
+            bias-disable;
+        };
+    };
+};
--
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux