Re: [PATCH 4/5] ARM: dts: qcom: Add vadc support for pm8775 pmic on SA8775P

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/07/2024 14:43, Satya Priya Kakitapalli wrote:
> Add support for reading the adc channels of pm8775 on SA8775P platforms.
> 
> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 90 +++++++++++++++++++++++++++++
>  1 file changed, 90 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> index 1369c3d43f86..bd4f5f51e094 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> @@ -1,8 +1,10 @@
>  // SPDX-License-Identifier: BSD-3-Clause
>  /*
>   * Copyright (c) 2023, Linaro Limited
> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
>   */
>  
> +#include <dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8775.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/spmi/spmi.h>
>  
> @@ -105,6 +107,28 @@ pmm8654au_0: pmic@0 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> +		pmm8654au_0_adc: vadc@8000 {
> +			compatible = "qcom,spmi-adc5-gen3";
> +			reg = <0x8000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			interrupts-extended = <&spmi_bus 0x0 0x80 0x1 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-names = "adc-sdam0";
> +			#io-channel-cells = <1>;
> +
> +			pmm8654au_0_die_temp {

Please read DTS coding style first and your internal guideline go/upstream.

Best regards,
Krzysztof





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux