Add support for MBG TM peripheral for pm8775 sail pmics on SA8775P.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 120 ++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
index bd4f5f51e094..69910306885e 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
@@ -89,6 +89,62 @@ trip1 {
};
};
};
+
+ pmm8654au_0_mbg_tm: pmm8654au_0_mbg_tz {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmm8654au_0_tz>;
+
+ trips {
+ trip0 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pmm8654au_1_mbg_tm: pmm8654au_1_mbg_tz {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmm8654au_1_tz>;
+
+ trips {
+ trip0 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pmm8654au_2_mbg_tm: pmm8654au_2_mbg_tz {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmm8654au_2_tz>;
+
+ trips {
+ trip0 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pmm8654au_3_mbg_tm: pmm8654au_3_mbg_tz {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmm8654au_3_tz>;
+
+ trips {
+ trip0 {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
};
reboot-mode {
@@ -180,6 +236,22 @@ reboot_reason: reboot-reason@48 {
};
};
+ pmm8654au_sail_0: pmic@1 {
+ compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmm8654au_0_tz: qcom,mbg-tm@d700 {
+ compatible = "qcom,spmi-mgb-tm";
+ reg = <0xd700>;
+ io-channels = <&pmm8654au_0_adc PM8775_ADC5_GEN3_DIE_TEMP(0)>;
+ io-channel-names = "thermal";
+ interrupts-extended = <&spmi_bus 0x1 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
+
pmm8654au_1: pmic@2 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x2 SPMI_USID>;
@@ -226,6 +298,22 @@ pmm8654au_1_gpios: gpio@8800 {
};
};
+ pmm8654au_sail_1: pmic@3 {
+ compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+ reg = <0x3 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmm8654au_1_tz: qcom,mbg-tm@d700 {
+ compatible = "qcom,spmi-mgb-tm";
+ reg = <0xd700>;
+ io-channels = <&pmm8654au_1_adc PM8775_ADC5_GEN3_DIE_TEMP(2)>;
+ io-channel-names = "thermal";
+ interrupts-extended = <&spmi_bus 0x3 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
+
pmm8654au_2: pmic@4 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
@@ -272,6 +360,22 @@ pmm8654au_2_gpios: gpio@8800 {
};
};
+ pmm8654au_sail_2: pmic@5 {
+ compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+ reg = <0x5 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmm8654au_2_tz: qcom,mbg-tm@d700 {
+ compatible = "qcom,spmi-mgb-tm";
+ reg = <0xd700>;
+ io-channels = <&pmm8654au_2_adc PM8775_ADC5_GEN3_DIE_TEMP(4)>;
+ io-channel-names = "thermal";
+ interrupts-extended = <&spmi_bus 0x5 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
+
pmm8654au_3: pmic@6 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x6 SPMI_USID>;
@@ -317,4 +421,20 @@ pmm8654au_3_gpios: gpio@8800 {
#interrupt-cells = <2>;
};
};
+
+ pmm8654au_sail_3: pmic@7 {
+ compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+ reg = <0x7 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmm8654au_3_tz: qcom,mbg-tm@d700 {
+ compatible = "qcom,spmi-mgb-tm";
+ reg = <0xd700>;
+ io-channels = <&pmm8654au_3_adc PM8775_ADC5_GEN3_DIE_TEMP(6)>;
+ io-channel-names = "thermal";
+ interrupts-extended = <&spmi_bus 0x7 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
};
--
2.25.1
