On 7/3/2024 3:50 PM, Dmitry Baryshkov wrote:
On Tue, Jul 02, 2024 at 09:20:43PM GMT, Satya Priya Kakitapalli wrote:
Add support for the camera clock controller for camera clients
to be able to request for camcc clocks on SM8150 platform.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
---
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/camcc-sm8150.c | 2159 +++++++++++++++++++++++++++++++++++++++
3 files changed, 2169 insertions(+)
The patch mostly LGTM, several quesitons:
- There are no cam_cc_sleep_clk and no cam_cc_xo_clk_src. Why?
These are not required for camcc sm8150 hence not modelled.
- Why is cam_cc_gdsc_clk not modelled in the clock framework?
This clock is kept enabled from probe, hence not required to be modelled
explicitly.
- I see that most if not all RCG clocks use rcg2_shared ops instead of
using simple rcg2 ops, could you please clarify that?
As per the HW design recommendation, RCG needs to be parked at a safe
clock source(XO) in the disable path, shared_ops is used to achieve the
same.
- RETAIN_FF_ENABLE has been used for GDSCs for sc7280, sc8280xp, sm8550,
sm8650 and x1e8 platforms. Should it really be set for sm8150? If so,
should it also be added to other camcc drivers (if so, for which
platforms)?
I have rechecked this in downstream and seems it is not really needed
for sm8150, I'll drop in next post.
