[PATCH v2 0/6] clk: qcom: sm8150: Add camera clock controller support for SM8150

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add camcc support and Regera PLL ops. Also, fix the pll post div mask.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
---
Changes in v2:
- As per Konrad's comments, re-use the zonda pll code for regera, as
  both are mostly same.
- Fix the zonda_set_rate API and also the pll_post_div shift used in
  trion pll post div set rate API
- Link to v1: https://lore.kernel.org/r/20240229-camcc-support-sm8150-v1-0-8c28c6c87990@xxxxxxxxxxx

---
Satya Priya Kakitapalli (5):
      clk: qcom: alpha-pll: Fix the pll post div mask and shift
      clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL
      dt-bindings: clock: qcom: Add SM8150 camera clock controller
      clk: qcom: Add camera clock controller driver for SM8150
      arm64: dts: qcom: Add camera clock controller for sm8150

Taniya Das (1):
      clk: qcom: clk-alpha-pll: Add support for Regera PLL ops

 .../bindings/clock/qcom,sm8150-camcc.yaml          |   77 +
 arch/arm64/boot/dts/qcom/sa8155p.dtsi              |    4 +
 arch/arm64/boot/dts/qcom/sm8150.dtsi               |   13 +
 drivers/clk/qcom/Kconfig                           |    9 +
 drivers/clk/qcom/Makefile                          |    1 +
 drivers/clk/qcom/camcc-sm8150.c                    | 2159 ++++++++++++++++++++
 drivers/clk/qcom/clk-alpha-pll.c                   |   56 +-
 drivers/clk/qcom/clk-alpha-pll.h                   |    5 +
 include/dt-bindings/clock/qcom,sm8150-camcc.h      |  135 ++
 9 files changed, 2455 insertions(+), 4 deletions(-)
---
base-commit: 20af1ca418d2c0b11bc2a1fe8c0c88f67bcc2a7e
change-id: 20240229-camcc-support-sm8150-d3f72a4a1a2b

Best regards,
-- 
Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux