Re: [PATCH v2 5/6] clk: qcom: Add camera clock controller driver for SM8150

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 02, 2024 at 09:20:43PM GMT, Satya Priya Kakitapalli wrote:
> Add support for the camera clock controller for camera clients
> to be able to request for camcc clocks on SM8150 platform.
> 
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
> ---
>  drivers/clk/qcom/Kconfig        |    9 +
>  drivers/clk/qcom/Makefile       |    1 +
>  drivers/clk/qcom/camcc-sm8150.c | 2159 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 2169 insertions(+)

The patch mostly LGTM, several quesitons:

- There are no cam_cc_sleep_clk and no cam_cc_xo_clk_src. Why?
- Why is cam_cc_gdsc_clk not modelled in the clock framework?
- I see that most if not all RCG clocks use rcg2_shared ops instead of
  using simple rcg2 ops, could you please clarify that?
- RETAIN_FF_ENABLE has been used for GDSCs for sc7280, sc8280xp, sm8550,
  sm8650 and x1e8 platforms. Should it really be set for sm8150? If so,
  should it also be added to other camcc drivers (if so, for which
  platforms)?

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux