Re: [PATCH v2 1/6] clk: qcom: alpha-pll: Fix the pll post div mask and shift

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 02, 2024 at 09:20:39PM GMT, Satya Priya Kakitapalli wrote:
> The PLL_POST_DIV_MASK should be 0 to (width - 1) bits. Fix it.
> Also, correct the pll postdiv shift used in trion pll postdiv
> set rate API. The shift value is not same for different types of
> plls and should be taken from the pll's .post_div_shift member.

Two separate commits for two different fixes, please.

> 
> Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
> ---
>  drivers/clk/qcom/clk-alpha-pll.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index 8a412ef47e16..6107c144c0f5 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -40,7 +40,7 @@
>  
>  #define PLL_USER_CTL(p)		((p)->offset + (p)->regs[PLL_OFF_USER_CTL])
>  # define PLL_POST_DIV_SHIFT	8
> -# define PLL_POST_DIV_MASK(p)	GENMASK((p)->width, 0)
> +# define PLL_POST_DIV_MASK(p)	GENMASK((p)->width - 1, 0)
>  # define PLL_ALPHA_EN		BIT(24)
>  # define PLL_ALPHA_MODE		BIT(25)
>  # define PLL_VCO_SHIFT		20
> @@ -1496,8 +1496,8 @@ clk_trion_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
>  	}
>  
>  	return regmap_update_bits(regmap, PLL_USER_CTL(pll),
> -				  PLL_POST_DIV_MASK(pll) << PLL_POST_DIV_SHIFT,
> -				  val << PLL_POST_DIV_SHIFT);
> +				  PLL_POST_DIV_MASK(pll) << pll->post_div_shift,
> +				  val << pll->post_div_shift);
>  }
>  
>  const struct clk_ops clk_alpha_pll_postdiv_trion_ops = {
> 
> -- 
> 2.25.1
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux