Re: [PATCH 3/7] phy: qcom: qmp-pcie: register second optional PHY AUX clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/03/2024 17:05, Dmitry Baryshkov wrote:
On Tue, 19 Mar 2024 at 17:15, <neil.armstrong@xxxxxxxxxx> wrote:

On 19/03/2024 15:46, Dmitry Baryshkov wrote:
On Tue, 19 Mar 2024 at 16:35, Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote:

On 19/03/2024 11:59, Neil Armstrong wrote:
On 19/03/2024 11:55, Dmitry Baryshkov wrote:
On Tue, 19 Mar 2024 at 12:45, Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote:

The PCIe Gen4x2 PHY found in the SM8[456]50 SoCs have a second clock,
add the code to register it for PHYs configs that sets a aux_clock_rate.

In order to get the right clock, add qmp_pcie_clk_hw_get() which uses
the newly introduced QMP_PCIE_PIPE_CLK & QMP_PCIE_PHY_AUX_CLK clock
IDs and also supports the legacy bindings by returning the PIPE clock.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
    drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 70 ++++++++++++++++++++++++++++++++
    1 file changed, 70 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 079b3e306489..2d05226ae200 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -22,6 +22,8 @@
    #include <linux/reset.h>
    #include <linux/slab.h>

+#include <dt-bindings/phy/phy-qcom-qmp.h>
+
    #include "phy-qcom-qmp-common.h"

    #include "phy-qcom-qmp.h"
@@ -2389,6 +2391,9 @@ struct qmp_phy_cfg {

           /* QMP PHY pipe clock interface rate */
           unsigned long pipe_clock_rate;
+
+       /* QMP PHY AUX clock interface rate */
+       unsigned long aux_clock_rate;
    };

    struct qmp_pcie {
@@ -2420,6 +2425,7 @@ struct qmp_pcie {
           int mode;

           struct clk_fixed_rate pipe_clk_fixed;
+       struct clk_fixed_rate aux_clk_fixed;
    };

    static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
@@ -3681,6 +3687,62 @@ static int phy_pipe_clk_register(struct qmp_pcie *qmp, struct device_node *np)
           return devm_clk_hw_register(qmp->dev, &fixed->hw);
    }

+/*
+ * Register a fixed rate PHY aux clock.
+ *
+ * The <s>_phy_aux_clksrc generated by PHY goes to the GCC that gate
+ * controls it. The <s>_phy_aux_clk coming out of the GCC is requested
+ * by the PHY driver for its operations.
+ * We register the <s>_phy_aux_clksrc here. The gcc driver takes care
+ * of assigning this <s>_phy_aux_clksrc as parent to <s>_phy_aux_clk.
+ * Below picture shows this relationship.
+ *
+ *         +---------------+
+ *         |   PHY block   |<<---------------------------------------------+
+ *         |               |                                               |
+ *         |   +-------+   |                      +-----+                  |
+ *   I/P---^-->|  PLL  |---^--->phy_aux_clksrc--->| GCC |--->phy_aux_clk---+
+ *    clk  |   +-------+   |                      +-----+
+ *         +---------------+
+ */
+static int phy_aux_clk_register(struct qmp_pcie *qmp, struct device_node *np)
+{
+       struct clk_fixed_rate *fixed = &qmp->aux_clk_fixed;
+       struct clk_init_data init = { };
+       int ret;
+
+       ret = of_property_read_string_index(np, "clock-output-names", 1, &init.name);
+       if (ret) {
+               dev_err(qmp->dev, "%pOFn: No clock-output-names index 1\n", np);
+               return ret;
+       }
+
+       init.ops = &clk_fixed_rate_ops;
+
+       fixed->fixed_rate = qmp->cfg->aux_clock_rate;
+       fixed->hw.init = &init;
+
+       return devm_clk_hw_register(qmp->dev, &fixed->hw);
+}
+
+static struct clk_hw *qmp_pcie_clk_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+       struct qmp_pcie *qmp = data;
+
+       /* Support legacy bindings */
+       if (!clkspec->args_count)
+               return &qmp->pipe_clk_fixed.hw;
+
+       switch (clkspec->args[0]) {
+       case QMP_PCIE_PIPE_CLK:
+               return &qmp->pipe_clk_fixed.hw;
+       case QMP_PCIE_PHY_AUX_CLK:
+               return &qmp->aux_clk_fixed.hw;
+       }
+
+       return ERR_PTR(-EINVAL);
+}

Can we use of_clk_hw_onecell_get() instead? I think it even should be
possible to use onecell for both cases, it will look at the first arg,
which will be 0 in case of #clock-cells equal to 0.

Let me investigate if it's possible

Ok, it would work but it would require building a clk_hw_onecell_data a runtime,
while we could simply provide this qmp_pcie_clk_hw_get() and avoid runtime 2 allocations.

I'm not sure it's worth it.

Single allocation (or even 0 allocations if you embed it into struct
qmp_pcie) for the sake of using standard helpers.

And I just recall I tried the same for Amlogic clocks, but the clk_hw_onecell_data hws
field is a flexible array member you can't set at runtime, if you try you'll get:
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c:3753:38: error: invalid use of flexible array member
   3753 |                 qmp->clk_hw_data.hws = qmp->clk_hws;

Yes, so it's either
devm_kzalloc(dev, struct_size(data, hws, 2), GFP_KERNEL);
or
struct qmp_pcie {
...
   struct {
     struct clk_hw_onecell_data clk_data;
     struct clk_hw clocks[2];
   };
};

I won't go down this path because of that mess and using of_clk_hw_onecell_get() would need
to still add a custom getter before calling of_clk_hw_onecell_get() to handle the
#clock-cells=0 legacy case.

Neil



Neil












[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux