Re: [PATCH 5/9] arm64: dts: qcom: qcs6490-rb3gen2: Enable adsp and cdsp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 22 Feb 2024 at 01:19, Bjorn Andersson <quic_bjorande@xxxxxxxxxxx> wrote:
>
> Define firmware paths and enable the ADSP and CDSP remoteprocs.
>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index 32313f47602a..ab498494caea 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -451,6 +451,16 @@ &qupv3_id_0 {
>         status = "okay";
>  };
>
> +&remoteproc_adsp {
> +       firmware-name = "qcom/qcs6490/rb3gen2/adsp.mbn";

This should be either

       firmware-name = "qcom/qcs6490/adsp.mbn";

or

       firmware-name = "qcom/qcs6490/Vendor/rb3gen2/adsp.mbn";


> +       status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> +       firmware-name = "qcom/qcs6490/rb3gen2/cdsp.mbn";
> +       status = "okay";
> +};
> +
>  &tlmm {
>         gpio-reserved-ranges = <32 2>, /* ADSP */
>                                <48 4>; /* NFC */
>
> --
> 2.25.1
>


-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux