[PATCH 5/9] arm64: dts: qcom: qcs6490-rb3gen2: Enable adsp and cdsp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Define firmware paths and enable the ADSP and CDSP remoteprocs.

Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 32313f47602a..ab498494caea 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -451,6 +451,16 @@ &qupv3_id_0 {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs6490/rb3gen2/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs6490/rb3gen2/cdsp.mbn";
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <32 2>, /* ADSP */
 			       <48 4>; /* NFC */

-- 
2.25.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux