[PATCH 0/9] arm64: dts: qcom: qcs6490-rb3gen2: Enable two displays

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


RB3Gen2 is capable of producing DisplayPort output on a dedicated
mini-DP connector and USB Type-C.

Utilize Abel's work for DP vs eDP selection to allow configuring both
controllers in DP-mode, then enable the two output paths.

Tested by driving fbcon to 4k@60 + 4k@30 concurrently.

Depends on https://lore.kernel.org/linux-arm-msm/20240220-x1e80100-display-v4-0-971afd9de861@xxxxxxxxxx/

Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
Bjorn Andersson (9):
      drm/msm/dp: Add DP support to combo instance in SC7280
      arm64: dts: qcom: sc7280: Make eDP/DP controller default DP
      arm64: dts: qcom: sc7280: Enable MDP turbo mode
      arm64: dts: qcom: qcs6490-rb3gen2: Add DP output
      arm64: dts: qcom: qcs6490-rb3gen2: Enable adsp and cdsp
      arm64: dts: qcom: qcs6490-rb3gen2: Enable USB role switching
      arm64: dts: qcom: qcs6490-rb3gen2: Introduce USB redriver
      arm64: dts: qcom: qcs6490-rb3gen2: Enable USB Type-C display
      arm64: defconfig: Enable sc7280 display and gpu clock controllers

 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 154 ++++++++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi   |   2 +
 arch/arm64/boot/dts/qcom/sc7280.dtsi         |   7 +-
 arch/arm64/configs/defconfig                 |   2 +
 drivers/gpu/drm/msm/dp/dp_display.c          |   9 +-
 5 files changed, 170 insertions(+), 4 deletions(-)
base-commit: aba508318eec7acad2373296279d6447fd35f83f
change-id: 20240209-rb3gen2-dp-connector-bddfb892ff20

Best regards,
Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux