On 12/15/2023 8:19 PM, Krzysztof Kozlowski wrote:
On 15/12/2023 12:42, Jie Luo wrote:
Which clocks are these mentioned in the property? From where do they come?
Anyway, property is in existing form is not correct - this is not a
generic property.
This property cmn-reference-clock is just the hardware register
configuration, since the different IPQ platform needs to select
the different reference clock source for the CMN PLL block that
provides the various clock outputs to the all kinds of Ethernet
devices, which is not from GCC provider.
AGAIN: where do the clocks come from? Which device generates them?
Oh, OK, the reference clock is from wifi that provides 48MHZ to
Ethernet block.
Then WiFi should be providing you the clock and this device should be
clock consumer, right?
Yes, wifi provides 48MHz clock to CMM PLL block, there is no GCC
for this 48MHZ clock output, it is the hardware PIN connection.
All clocks are some hardware pin connections.
Best regards,
Krzysztof
Yes, all reference clocks here are from hardware pin connection.
You keep answering with short sentences without touching the root of the
problem. I don't know exactly why, but I feel this discussion leads
nowhere. After long discussion you finally admitted that clocks came
from another device - Wifi. It took us like 6 emails?
So last statement: if you have clock provider and clock consumer, you
must represent it in the bindings or provide rationale why it should not
or must not be represented in the bindings. So far I do not see any of
such arguments.
If you use arguments like:
"My driver....": sorry, bindings are not about drivers
"I don't have clock driver for WiFi": sorry, it does not matter if you
can write one, right?
Please reach internally your colleagues to solve these problems and make
review process smoother.
Best regards,
Krzysztof
These reference clocks source do not need the hardware configuration,
that is the reason why the clock provider is not needed, some reference
clock source are even from external crystal.
There is also no enable control for the reference clocks since it is
inputted by the hardware PIN connection, i will update these description
in the DT to make it more clear.
