Re: [PATCH v2 5/5] dt-bindings: net: ipq4019-mdio: Document ipq5332 platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 15, 2023 at 08:40:20PM +0800, Jie Luo wrote:
> 
> 
> On 12/15/2023 8:19 PM, Krzysztof Kozlowski wrote:
> > On 15/12/2023 12:42, Jie Luo wrote:
> > > > > > > > > > Which clocks are these mentioned in the property? From where do they come?
> > > > > > > > > > 
> > > > > > > > > > Anyway, property is in existing form is not correct - this is not a
> > > > > > > > > > generic property.
> > > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > This property cmn-reference-clock is just the hardware register
> > > > > > > > > configuration, since the different IPQ platform needs to select
> > > > > > > > > the different reference clock source for the CMN PLL block that
> > > > > > > > > provides the various clock outputs to the all kinds of Ethernet
> > > > > > > > > devices, which is not from GCC provider.
> > > > > > > > 
> > > > > > > > AGAIN: where do the clocks come from? Which device generates them?
> > > > > > > 
> > > > > > > Oh, OK, the reference clock is from wifi that provides 48MHZ to
> > > > > > > Ethernet block.
> > > > > > 
> > > > > > Then WiFi should be providing you the clock and this device should be
> > > > > > clock consumer, right?
> > > > > 
> > > > > Yes, wifi provides 48MHz clock to CMM PLL block, there is no GCC
> > > > > for this 48MHZ clock output, it is the hardware PIN connection.
> > > > 
> > > > All clocks are some hardware pin connections.
> > > > 
> > > > Best regards,
> > > > Krzysztof
> > > > 
> > > 
> > > Yes, all reference clocks here are from hardware pin connection.
> > 
> > You keep answering with short sentences without touching the root of the
> > problem. I don't know exactly why, but I feel this discussion leads
> > nowhere. After long discussion you finally admitted that clocks came
> > from another device - Wifi. It took us like 6 emails?
> > 
> > So last statement: if you have clock provider and clock consumer, you
> > must represent it in the bindings or provide rationale why it should not
> > or must not be represented in the bindings. So far I do not see any of
> > such arguments.
> > 
> > If you use arguments like:
> > "My driver....": sorry, bindings are not about drivers
> > "I don't have clock driver for WiFi": sorry, it does not matter if you
> > can write one, right?
> > 
> > Please reach internally your colleagues to solve these problems and make
> > review process smoother.

> These reference clocks source do not need the hardware configuration,
> that is the reason why the clock provider is not needed, some reference
> clock source are even from external crystal.

I fail to understand how that makes this clock different to the clocks
on any other platform. Clocks from external crystals are present in many
many systems. See for example fixed-clock.yaml.

> There is also no enable control for the reference clocks since it is
> inputted by the hardware PIN connection, i will update these description
> in the DT to make it more clear.

Again, this does not justify having custom properties for this clock,
as it is no different to other platforms. As far as I can tell, the only
thing that a standard "clocks" property cannot convey here is the
internal reference. I would suggest that since there is only one
internal clock frequency, the absence of this particular clock in the
"clocks" property can be used to determine that the reference is the
internal one.

Thanks,
Conor.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux