Re: [PATCH v3 2/3] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Sep 09, 2023 at 06:56:01PM +0200, Robert Marko wrote:
> From: Christian Marangi <ansuelsmth@xxxxxxxxx>
> 
> Document named opp-microvolt property for opp-v2-kryo-cpu schema.
> This property is used to declare multiple voltage ranges selected on the
> different values read from efuses. The selection is done based on the
> speed pvs values and the named opp-microvolt property is selected by the
> qcom-cpufreq-nvmem driver.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> ---
>  .../bindings/opp/opp-v2-kryo-cpu.yaml         | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
> index bbbad31ae4ca..6f216306a7eb 100644
> --- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
> +++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
> @@ -63,6 +63,12 @@ patternProperties:
>            5:  MSM8996SG, speedbin 1
>            6:  MSM8996SG, speedbin 2
>            7-31:  unused
> +
> +          Bitmap for IPQ806X SoC:
> +          0:  IPQ8062
> +          1:  IPQ8064/IPQ8066/IPQ8068
> +          2:  IPQ8065/IPQ8069
> +          3-31:  unused
>          enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
>                 0x9, 0xd, 0xe, 0xf,
>                 0x10, 0x20, 0x30, 0x70]
> @@ -71,6 +77,24 @@ patternProperties:
>  
>        required-opps: true
>  
> +    patternProperties:
> +      '^opp-microvolt-speed[0-9]+-pvs[0-9]+$':
> +        description: |
> +          Named opp-microvolt property following the same generic
> +          binding for named opp-microvolt.
> +
> +          The correct voltage range is selected based on the values
> +          in the efuse for the speed and the pvs.

What is "pvs"?

> +
> +          The qcom-cpufreq-nvmem driver will read all these values
> +          and assign the correct named property.

Specific driver details don't belong in binding. If there's some detail 
or requirement of all consumers, then that is fine here.

> +        $ref: /schemas/types.yaml#/definitions/uint32-matrix

The common binding already defines the type. Drop.

> +        minItems: 1
> +        maxItems: 8   # Should be enough regulators

Does this really vary from 1 to 8 entries? Looks like copy-n-paste.

> +        items:
> +          minItems: 1
> +          maxItems: 3

Do you really need to support both single voltage and <nom min max> 
forms?

Rob



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux