On 11.08.2023 23:01, Robert Marko wrote:
> Rename the SPI-NOR node to flash@0, remove #address-cells and #size-cells
> as they should be under the partitions subnode and use the generic
> jedec,spi-nor compatible.
>
> Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> ---
You can also do "nandmanufacturer,mx25l25635e", "jedec,spi-nor"
Konrad
> arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
> index 0714616c9e45..f7ac8f9d0b6f 100644
> --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
> @@ -75,11 +75,9 @@ &blsp1_spi1 {
> status = "okay";
> cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
>
> - mx25l25635e@0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> + flash@0 {
> reg = <0>;
> - compatible = "mx25l25635e";
> + compatible = "jedec,spi-nor";
> spi-max-frequency = <24000000>;
> };
> };
