All of the nodes under soc already have existing labels so use those
instead.
Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
.../boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi | 140 +++++++++---------
1 file changed, 69 insertions(+), 71 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
index 0505270cf508..0714616c9e45 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
@@ -27,87 +27,85 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
+};
- soc {
- rng@22000 {
- status = "okay";
- };
+&prng {
+ status = "okay";
+};
- pinctrl@1000000 {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio54";
- };
- pinconf {
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
};
+ };
- blsp_dma: dma-controller@7884000 {
- status = "okay";
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
};
-
- spi@78b5000 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- mx25l25635e@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- compatible = "mx25l25635e";
- spi-max-frequency = <24000000>;
- };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio54";
};
-
- serial@78af000 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
+ pinconf {
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
};
-
- cryptobam: dma-controller@8e04000 {
- status = "okay";
+ pinconf_cs {
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
};
+ };
+};
- crypto@8e3a000 {
- status = "okay";
- };
+&blsp_dma {
+ status = "okay";
+};
- watchdog@b017000 {
- status = "okay";
- };
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ mx25l25635e@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ compatible = "mx25l25635e";
+ spi-max-frequency = <24000000>;
+ };
+};
- wifi@a000000 {
- status = "okay";
- };
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
- wifi@a800000 {
- status = "okay";
- };
- };
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+};
+
+&wifi1 {
+ status = "okay";
};
--
2.41.0
