Rename the SPI-NOR node to flash@0, remove #address-cells and #size-cells
as they should be under the partitions subnode and use the generic
jedec,spi-nor compatible.
Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
index 0714616c9e45..f7ac8f9d0b6f 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
@@ -75,11 +75,9 @@ &blsp1_spi1 {
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
- mx25l25635e@0 {
- #address-cells = <1>;
- #size-cells = <1>;
+ flash@0 {
reg = <0>;
- compatible = "mx25l25635e";
+ compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
};
};
--
2.41.0
