[PATCH] i2c: qup: Add missing unwind goto in qup_i2c_probe()

[Shuai Jiang <d202180596@xxxxxxxxxxx>]

Smatch Warns:
	drivers/i2c/busses/i2c-qup.c:1784 qup_i2c_probe()
	warn: missing unwind goto?

The goto label "fail_runtime" and "fail" will disable qup->pclk, 
but here qup->pclk failed to obtain, in order to be consistent, 
change the direct return to goto label "fail_dma".

Fixes: 10c5a8425968 ("i2c: qup: New bus driver for the Qualcomm QUP I2C controller")
Fixes: 515da746983b ("i2c: qup: add ACPI support")
Signed-off-by: Shuai Jiang <d202180596@xxxxxxxxxxx>
Reviewed-by: Dongliang Mu <dzm91@xxxxxxxxxxx>
---
The issue is found by static analysis and remains untested.
---
 drivers/i2c/busses/i2c-qup.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 2e153f2f71b6..78682388e02e 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -1752,16 +1752,21 @@ static int qup_i2c_probe(struct platform_device *pdev)
 	if (!clk_freq || clk_freq > I2C_MAX_FAST_MODE_PLUS_FREQ) {
 		dev_err(qup->dev, "clock frequency not supported %d\n",
 			clk_freq);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto fail_dma;
 	}
 
 	qup->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(qup->base))
-		return PTR_ERR(qup->base);
+	if (IS_ERR(qup->base)) {
+		ret = PTR_ERR(qup->base);
+		goto fail_dma;
+	}
 
 	qup->irq = platform_get_irq(pdev, 0);
-	if (qup->irq < 0)
-		return qup->irq;
+	if (qup->irq < 0) {
+		ret = qup->irq;
+		goto fail_dma;
+	}
 
 	if (has_acpi_companion(qup->dev)) {
 		ret = device_property_read_u32(qup->dev,
@@ -1775,13 +1780,15 @@ static int qup_i2c_probe(struct platform_device *pdev)
 		qup->clk = devm_clk_get(qup->dev, "core");
 		if (IS_ERR(qup->clk)) {
 			dev_err(qup->dev, "Could not get core clock\n");
-			return PTR_ERR(qup->clk);
+			ret = PTR_ERR(qup->clk);
+			goto fail_dma;
 		}
 
 		qup->pclk = devm_clk_get(qup->dev, "iface");
 		if (IS_ERR(qup->pclk)) {
 			dev_err(qup->dev, "Could not get iface clock\n");
-			return PTR_ERR(qup->pclk);
+			ret = PTR_ERR(qup->pclk);
+			goto fail_dma;
 		}
 		qup_i2c_enable_clocks(qup);
 		src_clk_freq = clk_get_rate(qup->clk);
-- 
2.25.1