> -----原始邮件----- > 发件人: "Shuai Jiang" <d202180596@xxxxxxxxxxx> > 发送时间: 2023-04-18 21:56:12 (星期二) > 收件人: "Andy Gross" <agross@xxxxxxxxxx>, "Bjorn Andersson" <andersson@xxxxxxxxxx>, "Konrad Dybcio" <konrad.dybcio@xxxxxxxxxx>, "Wolfram Sang" <wsa@xxxxxxxxxx>, "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>, "Sricharan R" <sricharan@xxxxxxxxxxxxxx>, "Naveen Kaje" <nkaje@xxxxxxxxxxxxxx>, "Austin Christ" <austinwc@xxxxxxxxxxxxxx> > 抄送: hust-os-kernel-patches@xxxxxxxxxxxxxxxx, "Shuai Jiang" <d202180596@xxxxxxxxxxx>, "Andy Gross" <agross@xxxxxxxxxxxxxx>, linux-arm-msm@xxxxxxxxxxxxxxx, linux-i2c@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx > 主题: [PATCH] i2c: qup: Add missing unwind goto in qup_i2c_probe() > > Smatch Warns: > drivers/i2c/busses/i2c-qup.c:1784 qup_i2c_probe() > warn: missing unwind goto? > > The goto label "fail_runtime" and "fail" will disable qup->pclk, > but here qup->pclk failed to obtain, in order to be consistent, > change the direct return to goto label "fail_dma". > > Fixes: 10c5a8425968 ("i2c: qup: New bus driver for the Qualcomm QUP I2C controller") > Fixes: 515da746983b ("i2c: qup: add ACPI support") > Signed-off-by: Shuai Jiang <d202180596@xxxxxxxxxxx> > Reviewed-by: Dongliang Mu <dzm91@xxxxxxxxxxx> > --- > The issue is found by static analysis and remains untested. > --- > drivers/i2c/busses/i2c-qup.c | 21 ++++++++++++++------- > 1 file changed, 14 insertions(+), 7 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c > index 2e153f2f71b6..78682388e02e 100644 > --- a/drivers/i2c/busses/i2c-qup.c > +++ b/drivers/i2c/busses/i2c-qup.c > @@ -1752,16 +1752,21 @@ static int qup_i2c_probe(struct platform_device *pdev) > if (!clk_freq || clk_freq > I2C_MAX_FAST_MODE_PLUS_FREQ) { > dev_err(qup->dev, "clock frequency not supported %d\n", > clk_freq); > - return -EINVAL; > + ret = -EINVAL; > + goto fail_dma; > } > > qup->base = devm_platform_ioremap_resource(pdev, 0); > - if (IS_ERR(qup->base)) > - return PTR_ERR(qup->base); > + if (IS_ERR(qup->base)) { > + ret = PTR_ERR(qup->base); > + goto fail_dma; > + } > > qup->irq = platform_get_irq(pdev, 0); > - if (qup->irq < 0) > - return qup->irq; > + if (qup->irq < 0) { > + ret = qup->irq; > + goto fail_dma; > + } > > if (has_acpi_companion(qup->dev)) { > ret = device_property_read_u32(qup->dev, > @@ -1775,13 +1780,15 @@ static int qup_i2c_probe(struct platform_device *pdev) > qup->clk = devm_clk_get(qup->dev, "core"); > if (IS_ERR(qup->clk)) { > dev_err(qup->dev, "Could not get core clock\n"); > - return PTR_ERR(qup->clk); > + ret = PTR_ERR(qup->clk); > + goto fail_dma; > } > > qup->pclk = devm_clk_get(qup->dev, "iface"); > if (IS_ERR(qup->pclk)) { > dev_err(qup->dev, "Could not get iface clock\n"); > - return PTR_ERR(qup->pclk); > + ret = PTR_ERR(qup->pclk); > + goto fail_dma; > } > qup_i2c_enable_clocks(qup); > src_clk_freq = clk_get_rate(qup->clk); > -- > 2.25.1 ping?