On 10.04.2023 20:10, Krzysztof Kozlowski wrote:
> Pin configuration property "input-enable" was used with the intention to
> disable the output, but this is done by default by Linux drivers. Since
> patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
> input-enable") the property is not accepted anymore.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 --
> arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi | 1 -
> arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 1 -
> arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts | 4 ----
> .../boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 1 -
> 5 files changed, 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> index ab35f2d644c0..861695cecf84 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> @@ -592,7 +592,6 @@ mpu6515_pin: mpu6515-state {
> pins = "gpio73";
> function = "gpio";
> bias-disable;
> - input-enable;
> };
>
> touch_pin: touch-state {
> @@ -602,7 +601,6 @@ int-pins {
>
> drive-strength = <2>;
> bias-disable;
> - input-enable;
> };
>
> reset-pins {
> diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
> index d3bec03b126c..68a2f9094e53 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
> @@ -433,7 +433,6 @@ ts_int_pin: touch-int-state {
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> - input-enable;
> };
>
> sdc1_on: sdc1-on-state {
> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> index 8d2a054d8fee..8230d0e1d95d 100644
> --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
> @@ -461,7 +461,6 @@ int-pins {
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> - input-enable;
> };
>
> reset-pins {
> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
> index b9698ffb66ca..eb505d6d7f31 100644
> --- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
> @@ -704,7 +704,6 @@ hostwake-pins {
> pins = "gpio75";
> function = "gpio";
> drive-strength = <16>;
> - input-enable;
> };
>
> devwake-pins {
> @@ -760,14 +759,12 @@ cmd-data-pins {
> i2c_touchkey_pins: i2c-touchkey-state {
> pins = "gpio95", "gpio96";
> function = "gpio";
> - input-enable;
> bias-pull-up;
> };
>
> i2c_led_gpioex_pins: i2c-led-gpioex-state {
> pins = "gpio120", "gpio121";
> function = "gpio";
> - input-enable;
> bias-pull-down;
> };
>
> @@ -781,7 +778,6 @@ gpioex_pin: gpioex-state {
> wifi_pin: wifi-state {
> pins = "gpio92";
> function = "gpio";
> - input-enable;
> bias-pull-down;
> };
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> index 04bc58d87abf..0f650ed31005 100644
> --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> @@ -631,7 +631,6 @@ ts_int_pin: ts-int-pin-state {
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> - input-enable;
> };
>
> bt_host_wake_pin: bt-host-wake-state {
