Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 --
arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi | 1 -
arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 1 -
arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts | 4 ----
.../boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 1 -
5 files changed, 9 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index ab35f2d644c0..861695cecf84 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -592,7 +592,6 @@ mpu6515_pin: mpu6515-state {
pins = "gpio73";
function = "gpio";
bias-disable;
- input-enable;
};
touch_pin: touch-state {
@@ -602,7 +601,6 @@ int-pins {
drive-strength = <2>;
bias-disable;
- input-enable;
};
reset-pins {
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
index d3bec03b126c..68a2f9094e53 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -433,7 +433,6 @@ ts_int_pin: touch-int-state {
function = "gpio";
drive-strength = <2>;
bias-disable;
- input-enable;
};
sdc1_on: sdc1-on-state {
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
index 8d2a054d8fee..8230d0e1d95d 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
@@ -461,7 +461,6 @@ int-pins {
function = "gpio";
drive-strength = <2>;
bias-disable;
- input-enable;
};
reset-pins {
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
index b9698ffb66ca..eb505d6d7f31 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -704,7 +704,6 @@ hostwake-pins {
pins = "gpio75";
function = "gpio";
drive-strength = <16>;
- input-enable;
};
devwake-pins {
@@ -760,14 +759,12 @@ cmd-data-pins {
i2c_touchkey_pins: i2c-touchkey-state {
pins = "gpio95", "gpio96";
function = "gpio";
- input-enable;
bias-pull-up;
};
i2c_led_gpioex_pins: i2c-led-gpioex-state {
pins = "gpio120", "gpio121";
function = "gpio";
- input-enable;
bias-pull-down;
};
@@ -781,7 +778,6 @@ gpioex_pin: gpioex-state {
wifi_pin: wifi-state {
pins = "gpio92";
function = "gpio";
- input-enable;
bias-pull-down;
};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 04bc58d87abf..0f650ed31005 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -631,7 +631,6 @@ ts_int_pin: ts-int-pin-state {
function = "gpio";
drive-strength = <2>;
bias-disable;
- input-enable;
};
bt_host_wake_pin: bt-host-wake-state {
--
2.34.1
