On 10.04.2023 20:10, Krzysztof Kozlowski wrote:
> Pin configuration property "input-enable" was used with the intention to
> disable the output, but this is done by default by Linux drivers. Since
> patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
> input-enable") the property is not accepted anymore.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts | 2 --
> arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts | 1 -
> arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts | 3 ---
> 3 files changed, 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
> index 7a80e1c9f126..aa0e0e8d2a97 100644
> --- a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
> +++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
> @@ -268,7 +268,6 @@ bluetooth_default_state: bluetooth-default-state {
> function = "gpio";
> drive-strength = <8>;
> bias-disable;
> - input-enable;
> };
>
> wlan_hostwake_default_state: wlan-hostwake-default-state {
> @@ -276,7 +275,6 @@ wlan_hostwake_default_state: wlan-hostwake-default-state {
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> - input-enable;
> };
>
> wlan_regulator_default_state: wlan-regulator-default-state {
> diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
> index d64096028ab1..5593a3a60d6c 100644
> --- a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
> +++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
> @@ -352,7 +352,6 @@ wlan_hostwake_default_state: wlan-hostwake-default-state {
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> - input-enable;
> };
>
> wlan_regulator_default_state: wlan-regulator-default-state {
> diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
> index b82381229adf..b887e5361ec3 100644
> --- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
> +++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
> @@ -307,7 +307,6 @@ bluetooth_default_state: bluetooth-default-state {
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> - input-enable;
> };
>
> touch_pins: touch-state {
> @@ -317,7 +316,6 @@ irq-pins {
>
> drive-strength = <8>;
> bias-pull-down;
> - input-enable;
> };
>
> reset-pins {
> @@ -335,7 +333,6 @@ wlan_hostwake_default_state: wlan-hostwake-default-state {
> function = "gpio";
> drive-strength = <2>;
> bias-disable;
> - input-enable;
> };
>
> wlan_regulator_default_state: wlan-regulator-default-state {
