On Tue, May 05, 2015 at 12:17:23AM -0700, Srinivas Kandagatla wrote:
> On 05/05/15 06:19, Kenneth Westfield wrote:
> >>>> >+enum lpaif_i2s_ports {
> >>>> >+ LPAIF_I2S_PORT_MIN = 0,
> >>>> >+
> >>>> >+ LPAIF_I2S_PORT_CODEC_SPK = 0,
> >>>> >+ LPAIF_I2S_PORT_CODEC_MIC = 1,
> >>>> >+ LPAIF_I2S_PORT_SEC_SPK = 2,
> >>>> >+ LPAIF_I2S_PORT_SEC_MIC = 3,
> >>>> >+ LPAIF_I2S_PORT_MI2S = 4,
> >>>> >+
> >>>> >+ LPAIF_I2S_PORT_MAX = 4,
> >>>> >+ LPAIF_I2S_PORT_NUM = 5,
> >>>> >+};
> >>>
> >>>These port mappings here...
> >>>
> >>>> >+enum lpaif_irq_ports {
> >>>> >+ LPAIF_IRQ_PORT_MIN = 0,
> >>>> >+
> >>>> >+ LPAIF_IRQ_PORT_HOST = 0,
> >>>> >+ LPAIF_IRQ_PORT_ADSP = 1,
> >>>> >+
> >>>> >+ LPAIF_IRQ_PORT_MAX = 2,
> >>>> >+ LPAIF_IRQ_PORT_NUM = 3,
> >>>> >+};
> >>>
> >>>...here...
> >>>
> >>>> >+enum lpaif_dma_channels {
> >>>> >+ LPAIF_RDMA_CHAN_MIN = 0,
> >>>> >+
> >>>> >+ LPAIF_RDMA_CHAN_MI2S = 0,
> >>>> >+ LPAIF_RDMA_CHAN_PCM0 = 1,
> >>>> >+ LPAIF_RDMA_CHAN_PCM1 = 2,
> >>>> >+
> >>>> >+ LPAIF_RDMA_CHAN_MAX = 4,
> >>>> >+ LPAIF_RDMA_CHAN_NUM = 5,
> >>>> >+};
> >>>
> >>>...and here can be SOC-specific. Should move them to the SOC-specific
> >>>files.
> >Expanding on this, the I2S port mappings for the APQ8016 should replace
> >the ones defined above with the constants you refer to in
> >dt-bindings/sound/apq8016.h:
> > MI2S_PRIMARY
> > MI2S_SECONDARY
> > etc.
> >
> >Maybe defining a corresponding ipq806x.h in the same directory, and
> >moving the above definitions there?
>
> As you pointed out i2s ports definitions can be moved to
> dt-bindings/soc/ipq806x.h but the channels can be directly defined
> in lpass-ipq806x.c as there would be no DT consumers for these
> defines
> anyway.
Moving the I2S ports to dt-bindings and the other definitions to their
SOC-specific source files works for me.
--
Kenneth Westfield
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
